Overclock.net banner

1 - 2 of 2 Posts

·
Registered
Joined
·
288 Posts
Discussion Starter #1
Can anyone help me find some uv led strips that are either 2pin or 3pin and magnetic? I was looking at the ones Icemodz sells and they seemsto be what I want but do not say how they mount so I am assuming they mount with adhesive but I want magnetic.

I want to wire the strips to a switch so 2pin would be preferred as I do not know how to interrupt a 3pin cable. if anyone can tell me how to wire a 3pin to a switch that would be helpful also.

To sum up-- 12inch or less uv led strip with 2pin or 3pin connector that is magnetic and hoping to daisy chain 3 at a time

I want 6 of these strips

Thanks for any help you can provide

http://www.icemodz.eu/store/#!/UV-Ultraviolet-5050-led-strip-s-2-Year-Warranty/p/52324296/category=5346676

these are the ones I was looking at

Have to head off to work but will check back tonight
 

·
Registered
Joined
·
1,810 Posts
A fan connector may have 3 wires for a FAN (to sense RPM) but for LED strips, they probably are only using the voltage lines (12v and ground).

http://pinouts.ru/Motherboard/MbCpuFan_pinout.shtml

ive never seen any LED strips with magnetic mounting... good luck with that. whats wrong with adhesive ? A good clean stick of high quality LED strips shouldn't fall off.
 
1 - 2 of 2 Posts
Top