[BWG]

Does anyone know how to fix this little nuisance? My folding client shows my 770 is the GPU, but when I start it, my 570 has full load and my 770 is idle. I plan to fold both GPU's, so I have them both loaded in v7, but it would just tickle my OCD brain to see it show the correct GPU in v7.

 

[lanofsong]

An idea but I am not sure it will work:

Can you delete both GPU from the program.

Pull out one of the GPU's.

Add GPU from the configure menu - should recognize the card left in the rig.

Add second GPU and configure.

Some restarts may be necessary in between

 

[BWG]

Well, unfortunately that's exactly how it happened. I had the 770 in the machine with the client setup for the 770 and 2600k. I added the 570 today. I manually added the 570 to v7.

I did try swapping the GPU# here:



I've had this problem for a while in my machines with multiple GPU's not of the same Core.

 

[bigblock990]

BWG, check out this guide by downshiftartist

http://www.overclock.net/t/1490720/guide-configuring-client-v7-7-4-4-for-multiple-additional-gpus