[dangerousHobo]

Right now my bios says the vcore is 1.40v but CPU-z, OCCT and speedfan all say 1.36v.

I didn't have this problem at first. I'm guessing my PSU is at fault.

 

[The Duke]

Nothing like a volt meter to know for sure!

 

[dangerousHobo]

How would I test it with a volt meter?
Thanks for the fast reply Duke.

 

[The Duke]

Just curious... what are the reported voltages in your BIOS... those are the voltages you kneed to know are stable!
See fig 10 on pg 34 for the layout to test

http://www.formfactors.org/developer...20PSDG2.01.pdf

Of see this FAQ on voltage.
http://www.overclock.net/faqs/41945-...easure-my.html

 

[dangerousHobo]

its set to 1.4v and it reads 1.38v then I boot and go in and look that them.
and when set to 1.425v it always reads at 1.41v in the bios. and 1.38 in cpuz