Overclock.net banner
1 - 11 of 11 Posts

·
Registered
Joined
·
311 Posts
Discussion Starter · #1 ·
!!THIS Will Burn your CARD !!
some cards like msi gaming don't accept the Rbby258 ABVoltmod voltage send but they accept the unlock
yet they the unlock from ZawarudoAB V3 don't work on them , but the packet send to change voltage do work
you will need to move the TDP limit to apply the new voltage
here's a video how to unlock voltage to unlimited
you will need the 3 Mods to make this work !
you will need AB 16 beta
change the date to 13 december. to make it work
and you will need the 1.3 V softmode unlocked
let's go
tongue.gif
!!

so you will have to use the ZawarudoAB V3 to change value of voltage
Rbby258 ABVoltmod : http://www.overclock.net/t/1425102/updated-for-ab-beta-16-fully-unlocked-ncp4206-voltage-llc-mod-tool
ZawarudoAB V3 :http://www.overclock.net/t/1398725/unlock-afterburner-limits-on-lots-of-cards-titan-to-gtx460-with-llc
video " i hope you will like the music, i can't stop listening to this song":
 

·
Registered
Joined
·
377 Posts
Help me I can't seem to get this to work. When i open the tool made by Rbby258 I get the error Access to the path "C:/Programs Files (x86)/MSIAfterburner\runasdate.exe" is denied. The I click continue and check status and insted of :00 I get invalid. I will put pictures showing this.
Here:



I have an Asus 770 dcu2 btw
 

·
Registered
Joined
·
311 Posts
Discussion Starter · #3 ·
Quote:
Originally Posted by Tillmander View Post

Help me I can't seem to get this to work. When i open the tool made by Rbby258 I get the error Access to the path "C:/Programs Files (x86)/MSIAfterburner\runasdate.exe" is denied. The I click continue and check status and insted of :00 I get invalid. I will put pictures showing this.
Here:



I have an Asus 770 dcu2 btw
run as administrator MSI AB and the voltage tool
 

·
Registered
Joined
·
311 Posts
Discussion Starter · #7 ·

·
Registered
Joined
·
112 Posts
i use another way
tongue.gif


install MAB and go to MAB/profile

find the file
Quote:
VEN_10DE&DEV_1184&SUBSYS_28291462&REV_A1&BUS_1&DEV_0&FN_0
and copy
Quote:
[Settings]
VDDC_Generic_Detection = 0
VDDC_NCP4206_Detection = 4:20h
to it

then restart MAB and silde vol change to auto,now,you can change the voltage max to 1,3V,if you want more,you the artmoney
tongue.gif


sry my ENGLISH
 

·
Registered
Joined
·
311 Posts
Discussion Starter · #11 ·
Quote:
Originally Posted by kimmelbaer View Post

Hey, i just got a Inno3d GTX770 Black series Watercooled.

I tried several things to unlock voltage but nothing works.

Maybe someone could help me.

Thanks
i think yours its not ncp4206
maybe the AB not the right ver
try older ones and change date to make it work
 
1 - 11 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top