[Doogiehouser]

So I just flashed successfully to the new bios v1.10 for my msi gd65 board. I have a stable overclock [email protected] But when at 1.6Ghz my voltage is still at 1.320v, before it would only go to that voltage when used at 4.6Ghz. I know it's probably a simple option within my BIOS to turn off/on but I'm not sure which one it is.

Thanks

 

[yergg]

Quote:

Originally Posted by Doogiehouser So I just flashed successfully to the new bios v1.10 for my msi gd65 board. I have a stable overclock [email protected] But when at 1.6Ghz my voltage is still at 1.320v, before it would only go to that voltage when used at 4.6Ghz. I know it's probably a simple option within my BIOS to turn off/on but I'm not sure which one it is. Thanks

The issue is that you manually set your voltage. If the voltage is set to auto, you will see significant drops in voltage. The problem here is that you may never see 4.6Ghz by using the Auto Voltage.

If you were to set Auto, make sure that EIST is on as well as your C States are set to no limit.

--yergg