Overclock.net banner

1 - 2 of 2 Posts

·
Registered
Joined
·
1,935 Posts
Discussion Starter #1
Hello, saying Hi to the CPU forums
. Currently done a bit of ocing with my computer. I've got it setting at a HT X4 with the FSB at 230 and the multiplier at X11. The divider is currently set at 166 (Thinking my memory doesnt like to be OC'ed) Im sure I could go up more a but wondering about the voltage. Im still uncertain how much and when i need to increase my voltage. At a fairly full load the temps stay at 30-32. I've increased my voltage and I am looking at 1.408 acording to CPU-z. Most of the FAQ's and walkthroughs I've read tell you to up the voltage but not about how much and really when it is best. Just looking for a little push in the right direction or maybe a quick explanation as to what should be safe. Thanks much.
 

·
Premium Member
Joined
·
3,590 Posts
once you oc so far it will become unstable then up the voltage up to then next setting on your mobo. The little extra voltage should then make it stable again. Keep it under 1.55v and watch your temps. keep them under 50c I like to keep mine under 45c
 
  • Rep+
Reactions: hednik
1 - 2 of 2 Posts
Top