Overclock.net banner

Water Cooling didnt change my temps at all over air :(

1628 Views 34 Replies 18 Participants Last post by  mtbhrd
Hey guys, I finished setting up my WC loop today. I actually changed it, before the rad was mounted inside, then I put it outside the case, and the temps still are the exact same as when I was air cooling with the vendetta 2.


Earlier Loop (about 5 hours ago loop)

What would be causing me to have to temp change?

I have 3 fans on the rad. I ordered 4 Scythe Slip Stream Kaze Jyuni 120MM Fan 1200RPM 68.5CFM 24DBA

The loop consists of DD CPX-PRO --> MCR220 --> Apogee GTZ --> Temporary custom res --> back to pump
1 - 1 of 1 Posts
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.