Overclock.net banner

Water cooling help (noob alert)

242 4
So I'm pretty aware of the 50,000 other posts like this but I just don't have the time to go through all of them so I was hoping for some help.

My chassis is an RV02-EW and I'm shooting for a setup pretty much identical to the one in the picture.

I've already got a 360 stealth black Ice GT rad to go on the bottom there and an EK Acetal Supreme HF CPU block and an evga hydro copper 2 on their way.

I would like to go with that EK Multioption 150mm res but I'm curious to know if maybe there is a res similar but better to it that I can go with in the same orientation and placement.

And as for the pump, hosing and compression fittings I'm a bit lost. I would like some suggestions on these.

Lastly, I'm aware that distilled water + silver coil is probably my best bet for liquid. Although I was wondering if using feser uv liquid would hurt?

Thanks guys!
1 - 1 of 1 Posts
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top