[Scout Lukas]

Hi OCN

OK for my up coming build when the intel haswell and the new gtx 700 series come out, I will be doing a fully water cooled build and I need you guys to have a look at some of the things I have chosen, please ask questions so I can clarify something for you, or give any other recommendations you can to me

WHAT I THINK I WILL BE GETTING SO FAR:

CPU block http://www.jab-tech.com/EK-Supremacy-CPU-Water-Block-Nickel-Plexi-pr-5005.html

GPU block - some new block

PUMP - http://www.jab-tech.com/Swiftech-MCP-355-12v-DC-Pump-pr-3510.html

RADS - x2 http://www.jab-tech.com/Black-Ice-GT-stealth-240-Black-pr-3417.html

RES - http://www.jab-tech.com/Swiftech-MCP35X-Reservoir-Rev-2b-pr-4810.html

FITTINGS- http://www.jab-tech.com/Enzotechnology-Compression-Fitting-1-2-3-4-Matt-Black-pr-4686.html

Please check these parts out and recommend also what tubing should I get because I really have no clue

THANK you very much rep to all who help

 

[Scout Lukas]

also any fan and fan controllers suggestions are welcome

 

[Scout Lukas]

.

 

[Scout Lukas]

I am I doing something wrong 55views and no one even said a word

 

[jjpctech]

Looks good so far.

 

[Scout Lukas]

.

 

[PepeLapiu]

Rads:I would recommend Alphacool Full Copper rads over the Black Ice. The Alphacool rads are the best performers out their as tested by Martin of MLL and they also are very low restriction.

Pump: I personnally prefer D5 type pumps as they are more quiet. The Koolance Vario appears to be the most quiet of all, again as tested by Martin of MLL. That is the one I am getting on my next build. They don't run as hot as the DCC pumps either, as they use the coolant to cool off.

Fans: The favorites are Gentle Typhoon fans as they have the best static pressure to noise ratio. The AP-45 is decently priced at FrozenCPU right now.

Controller: Definately the Lamptron line. Best controllers out there in my opinion. The only thing I don't like about them is they don't ramp up the fan speed, they go go from your default set speed to 100% in one step. That is if you get the Touch, manual ones will not have this problem.

 

[Scout Lukas]

Quote:

Originally Posted by PepeLapiu

Rads:I would recommend Alphacool Full Copper rads over the Black Ice. The Alphacool rads are the best performers out their as tested by Martin of MLL and they also are very low restriction.

Pump: I personnally prefer D5 type pumps as they are more quiet. The Koolance Vario appears to be the most quiet of all, again as tested by Martin of MLL. That is the one I am getting on my next build. They don't run as hot as the DCC pumps either, as they use the coolant to cool off.

Fans: The favorites are Gentle Typhoon fans as they have the best static pressure to noise ratio. The AP-45 is decently priced at FrozenCPU right now.

Controller: Definately the Lamptron line. Best controllers out there in my opinion. The only thing I don't like about them is they don't ramp up the fan speed, they go go from your default set speed to 100% in one step. That is if you get the Touch, manual ones will not have this problem.

Thanks for all suggestions, Would the copper and nickle interfere with each other because I know that I shouldn't mix copper and aluminium but what about copper and nickle, also could you send me the links for the products you have recommend please thank you

 

[PepeLapiu]

Everything I listed can be found on both FrozenCPU and PerformancePC.
The nickel and copper can mix without any problems.

Martin's comparrison chart can be found here thought he doesn't have the Black Ice listed.