Overclock.net banner
1 - 6 of 6 Posts

·
Registered
Joined
·
372 Posts
Discussion Starter · #1 ·
Yo guys.

Tomorrow im getting my wc parts.
I made a sketchup for my setup.


(Pomp > Radiator > Cpu > Reservoir > back to pump)

Please rate it, and dont complain about my sketchupskills
!
 

·
Premium Member
Joined
·
5,275 Posts
Make sure your reservoir feeds into your pump inlet and that your pump pushes into your radiator. You'll want the reservoir above the pump so water is forced into the inlet by gravity.

Other than that


Glad to see you're getting rid of that bigwater system.
 

·
Registered
Joined
·
372 Posts
Discussion Starter · #5 ·
Quote:


Originally Posted by rpm666
View Post

Make sure your reservoir feeds into your pump inlet and that your pump pushes into your radiator. You'll want the reservoir above the pump so water is forced into the inlet by gravity.

Other than that


Glad to see you're getting rid of that bigwater system.

Ye , the outlet is going to the RAd, and the reservoir is connected with the inlet


Thanks m8
 

·
Registered
Joined
·
372 Posts
Discussion Starter · #6 ·
Sorry for double posting.

Does somebody know if the fans on top of the radiator needs to pull the air out of the case or push cold air inside??
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top