Overclock.net banner
1 - 5 of 5 Posts

·
Registered
Joined
·
628 Posts
Discussion Starter · #1 ·
Ok I'm just about ready to slit my wrists. I've got a weird problem now. I keep on getting BSOD when I play games. Something about a secondary clock? I ran OCCT on the CPU and no problem. But now the problem comes when I stress only RAM! I've swopped my ram with my old OCZ sticks and same thing, BSOD not even 5 seconds into the test. The ram is supposed to run on 2.2V, but no matter what I change it to in the BIOS it stays on 1.90V. I'm clueless.... Help me plz!!
 

·
Registered
Joined
·
628 Posts
Discussion Starter · #3 ·
Geez I really hope so. But why would it give me that error if I only stress on RAM in OCCT?
 

·
Registered
Joined
·
628 Posts
Discussion Starter · #5 ·
Guys! I found the problem! It was the PSU, plus the CPU was a bit undervolted. Installed a 600W with 8-pin CPU power connector and pushed the VCore up to 1.2 and all is good. Ran OCCT on mix for 3 hours and no problems. Thanks for all the tips and advice!
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top