[somebadlemonade]

i'm not building a loop till some time this summer, after i upgrade a few things
it'll only end up being a cpu+gpu loop maybe if the motherboard i get has a full coverage block cpu+gpu+motherboard

the cpu will either be a bulldozer or a 2500k and either a gtx570 or a hd6970

i kind of figure, i might have to get a specific case for the rad if i should get a 120.4, or 140.3+120 to 140 adapters

 

[Kinru]

SR-1 Series
XSPC RX Series

Anything with low fpi count (fins per inch) are optimized for lower speed fans and would do very well with AP-13s, although I would personally recommend getting the 15s and then undervolting them just so you have the ability to turn them up if you want.

 

[PulkPull]

XSPC RS or RX series. RX if you can fit it, RS if you can not.

 

[somebadlemonade]

honestly, i'm probably going to end up making a case just so i can put two 480 rads on the bottom so i can make a low/no noise rig

edit, i don't really want to under volt since sometimes you get weird harmonics or motor whine when you do

what are some decent fans under 25dba?

 

[Kinru]

http://www.overclock.net/water-cooli...ng-thread.html

Go nuts

 

[Triangle]

HWLabs SR-1 Series or XSPC RX series.

Thermochill TA...

 

[-javier-]

ill get the XSPC RX series.