Originally Posted by TekWarfare More heat, just make sure the Northbridge is well cooled. The memory is not a limiting factor as it should be, in thory, running at 800MHz. Those temps seem pretty good, are they load or idle temps? |
Originally Posted by bk7794 load temps. I need some new ram sticks. For speed and for memory. Alright What else will need to be done after 1600fsb? |
Originally Posted by shadow19935 Well depends if your mobo can take it, if not it will just rester last known good configuration, end of. |
Originally Posted by ericeod The UD3R motherboard can push quads past 530 FSB (2120 QDR). So 400 FSB (1600 QDR) is far from its limit. |
Originally Posted by bk7794 really?!? awesome!!! Thanks so much. Will everything hold out to 4ghz 24/7? |
Originally Posted by ericeod Check out the EP45-UD3P (the R OCs the same, but only has 1 PCI-E slot). http://www.overclock.net/intel-mothe...ers-guide.html I've seen a lot of 24/7 OCs ~515 FSB with quads. |
