Overclock.net banner

What to set the core priority to in [email protected]

835 Views 16 Replies 8 Participants Last post by  huntman21014
Well I am just wondering if that would net me any more points, they are set to low right now but is there any harm in setting them to normal?
1 - 17 of 17 Posts
Don't set them to normal! Most processes run at normal, and you'll make your whole computer unusable while it's running.
should you just leave it as normal priority and let it do what it does?
ok ignore that post i did ,sorry
Well when I started up the SMP core my GPU2 PPD went from 5500 to 2000, what would cause that?
Different WU?
Quote:

Originally Posted by DuckieHo View Post
Different WU?
No it was at 63% chugging along at 5500PPD and as soon as I started up the SMP it tanked to 2000PPD, I just disabled the SMP and am back up to 5800PPD
See less See more
I set the fah_core 11/14 to above normal with set priority, since when the core stops to send the WU it resets itself. If I don't do this I get the same type of drop. Hope this helps.
See less See more
It does, I let it go for a little while and my SMP points was at 230PPD and my 9800GTX was at 1000PPD, with just the 9800GTX its around 5700PPD. Should I set the CPU percentage to 50% for each core instead of both at 100%?
Idle on CPU with GPU set to "slightly higher" used to work the best for me. It's been a few days I've been getting like 900 PPD on my SMP and still trying to figure what's going on.
Madcat

I finally got my I7 SMP client running

pumping out 2958 PPD for a 1760 pointer in Windows vista 64 SMP MPICH client
See less See more
3
Alright, setting the priority helps but how do I set it so that it always goes to above average without my intervention, this will eventually be a folding rig 24/7 and I will not be able to come and mess with it every 2 hours
On the phone so I can't cut and paste, but do a search for setpriority. There is a thread that explains how to use it, it is a program that will automatically set the priority when started.
See less See more
This is the one I am using.

Linky
Quote:


Originally Posted by huntman21014
View Post

Alright, setting the priority helps but how do I set it so that it always goes to above average without my intervention, this will eventually be a folding rig 24/7 and I will not be able to come and mess with it every 2 hours

Ok seriously, setting priorities with other programs in [email protected] is for the last time, unnecessary.
If you're using the GPU tray version, go to the advanced tab and pick the second option. If you're using the cmd version run it with -configonly and you will eventually be questioned about the priority: Idle, or Low; idle is the lowest, low is one step above that.
See less See more
Quote:

Originally Posted by MadCatMk2 View Post
Ok seriously, setting priorities with other programs in [email protected] is for the last time, unnecessary.
If you're using the GPU tray version, go to the advanced tab and pick the second option. If you're using the cmd version run it with -configonly and you will eventually be questioned about the priority: Idle, or Low; idle is the lowest, low is one step above that.
Well I was getting 5500PPD with it on low and with it on high I am getting 6500PPD so I would consider that a good change, also I could net 4500PPD and 1500PPD with set priority while I could only get around 1300PPD total without it
See less See more
1 - 17 of 17 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top