Overclock.net banner

What water cooling will work with my mobo. Just had to bolt cut the H60 off.

215 4
As you can see the caps are in the way on both sides of the chip only allowing a small portion of the block to touch the cpu.

20111005_123330.jpg


20111005_123336.jpg


The top left screw number was stripped so I had to remove it with a bolt cutter.

20111005_124614.jpg
1 - 2 of 2 Posts

· Premium Member
Joined
·
3,093 Posts
First off, I'll buy that H60 off you (if you're in the US and want a fair price for it), because I've been wanting one to try and mod onto my 470 graphics card.

Secondly, I think the Antec Kuhler, or the H50 is the smallest footprint as far as the surface going to the board, but I don't know if that would be small enough even. If they aren't, you may have to go for a full water cooling loop and get something like http://www.koolance.com/water-cooling/product_info.php?product_id=2030 that Koolance claims will fit that board, or check out the list: http://www.coolingconfigurator.com/step1 after you put in your model of MoBo. The ones listed as "physical" are known to work on that board.
 

· Premium Member
Joined
·
3,093 Posts
Quote:
Originally Posted by Tiako44;15189861
The second link to match to my mobo does not have my mobo. My mobo is rev 1.0 and they have rev 1.6.
frown.gif


I would sell the H60 to you but its well under 30 days and I would think CompUSA would take it back or I would have to RMA to Corsair.
Looking at the socket area of rev 1 vs 1.6 the caps are a slightly smaller diameter on 1.6 but they look to be the same height and the distance to the socket from the caps on both side has changed by ~0.1" Should be close enough to be compatible.

And if they don't take the return / RMA, due to you having to cut it, pm me.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top