[SadSoul]

Will this Feser hose fit this Swiftech H20-30 kit??
http://www.sidewindercomputers.com/fetuftacuvho4.html

http://www.sidewindercomputers.com/swh2edwitr12.html

And how much lenthg will I need?

One of those hose units is 1 foot i believe. Will 2 be enough for a CPU only loop????

Thanks

 

[Onions]

yes it will but you can use 3/8 tubing for a more snugg fit. The tubing you selected is good stuff it will do just fine with some clamps or zip ties

 

[t-ramp]

It will. ~6 feet should be more than enough, but it never hurts to have extra.

 

[t-ramp]

Quote:

Originally Posted by Onions;13049843
yes it will but you can use 3/8 tubing for a more snugg fit. The tubing you selected is good stuff it will do just fine with some clamps or zip ties

7/16", not 3/8". 3/8" would be very difficult to get over 1/2" barbs.

Edit: Crap, my bad. Sorry for the double post.

 

[blu3phoenix]

Be sure to match hose ID (inner diameter) with the barbs diameter. Hose clamps to seal your loop.

Be sure to get extra feet in case of anything

 

[SadSoul]

won't 2 feet be enough since Iam mounting RAD on top??

Also I want the tubes to look totally white an Iam getting a black powder coated case.

Will I get the desired effect with these tubes??

 

[blu3phoenix]

Yes but you don't want tO get too little otherwise you'll have to reorder more and shipping is expensive for online retailers! If you get more than you need you'll be on the safe side.

I have the antec902 and it's all black with white tubes. Nice look!