Overclock.net banner

1 - 13 of 13 Posts

·
Registered
Joined
·
1,829 Posts
Discussion Starter #1
Getting weird two issues on Windows 10. Everytime i properly restart system windows after next boot windows showing Automatiic repair and then again is restart. And event viewer showing that closing system was not properly.But windows was closed properly.
Second issue.
Some of the applications randomly wont run. I mean i am clicking to open and nothing happens. I cant run task manager because he wont opening. I cant run event viewer because he wont opening. And all of rest applications randomly wont run. Sometimes logout from my account in Windows and log again help and then some of the applications run properly. Also when i am playing games all is fine and stable and no crashes.
Problem is only with opening applications in Windows 10. I made clean install on a fresh formatted disk month ago.

Somebody said to me that issue can be in bad rams or bad ssd.

So first i checked HDTUNE , but HDTUNE dont reporting BAD SECTORS and Smart is 100% GOOD according to CrystalDiskInfo. Next i tried Memtest86 but after few hours dont find any errors.

Its something with windows or my hardware ?

My system is on stock. 4790k stock, 16gb DDR3 Kingston Hyperx 1600mhz, Corsair 750 RM, Asus Sabertooth Z97 Mark 2, Asus Strix 980 Ti Oc, Samsung 250 GB SSD EVO
 

·
Registered
Joined
·
2,012 Posts
With startup repair , have you used it to check for startup issues ?

Use only one stick of ram then try the following

Can you also run SFC /Scannow in the command prompt and see if it reports any issues ?

Running chkdsk wouldn't go a miss either.

Then see if you can open event viewer
 

·
Registered
Joined
·
1,829 Posts
Discussion Starter #3
I run memtest86 for few hours, and no errors. But still i randomly cant open event viewer or task manager. Sometimes logout from my account in Windows and log again help and then some of the applications run properly. . Is this rather hardware or software issue?
 

·
Registered
Joined
·
2,012 Posts
Use one stick of ram then see if you can open the event log - Will rule out memory issue ( will need to test different sticks)

run SFC /Scannow to see if windows is corrupt ( would mean software issue but could be caused by hardware)
 

·
Registered
Joined
·
1,829 Posts
Discussion Starter #7
So i reformat disk and install clean Windows 10. Now i can open any programs and event log. So that was issue on windows or still ram problem?
 

·
Registered
Joined
·
2,012 Posts
You run memory tests or system stability tests to see if the system is stable for say 24 hours

Would show any hardware issues if you had any .

The fact a clean install has fixed it and you've not got anymore issues but have also done some tests means its probably just windows.
 

·
Registered
Joined
·
1,829 Posts
Discussion Starter #13
So i was using my Windows 10 Pro fine. Then i decide ( no reason ) to test memtest86 from bootable USB. Then after 5 hours ( without errors memtest ) i stop test. Then after this i boot windows and windows just get broken. ( AND THEN : Everytime i properly restart system windows after next boot windows showing Automatiic repair and then again is restart. And event viewer showing that closing system was not properly.But windows was closed properly.
Second issue.
Some of the applications randomly wont run. I mean i am clicking to open and nothing happens )

Is this only coincedence or not if it happens after memtest session?
 
1 - 13 of 13 Posts
Top