Would this PSU be enough for this build?

360 Views 2 Replies 3 Participants Last post by ENTERPRISE, Dec 14, 2006

Peroxide

Discussion Starter · Dec 12, 2006

I used the calculator and it said it would be, but I wanted to make sure.

Thermaltake TR2 W0070 430W powering a MSI K9NU NEO-V with a 3200+ oced to 2.7, with OCZ GX XTC PC2-5400 2X512MB and a 7600GT (haven't decided which exactly). Then there would be the HDD and opticals listed below.

That'd be more than enough right?

Save

1 - 3 of 3 Posts

Ste

· #2 · Dec 12, 2006

Yeah, should be fine. Presume it's the $30 one here:
http://www.newegg.com/Product/Produc...82E16817153023

The 430W rating is very heavy on the +5v line, but still has over 200W on the 12v rail which should be fine for the rig you'll be running.

Save

ENTERPRISE

· #3 · Dec 14, 2006

Yes that PSU will be just fine for your current SETUP.

Save

1 - 3 of 3 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.

Top Contributors this Month