[HothBase]

Quote:

Hey, I'm having trouble with getting my LCD monitor to work properly with my Sapphire x1950 GT AGP card. The card has 2 DVI-I exits. Everything works fine when using a DVI-I to VGA adapter and a VGA cable to connect it to the monitors VGA input (it has both DVI-D and VGA) The problem is that when I try using a DVI-D cable to connect the two, I get no signal to the monitor. CCC doesn't detect that anything, even when I set the monitor to DVI input mode. The connection schemes looks like this. Working: Quote: [Card DVI-I out] | | | | | | | | [DVI-I to VGA adapter] | | | | | | | | [VGA cable] | | | | | | | | [Monitor VGA in] Not working: Quote: [Card DVI-I out] | | | | | | | | [DVI-D cable] | | | | | | | | [Monitor DVI-D in] From what I know, DVI-D cables should work just fine with DVI-I exits, so I don't know what's wrong... Might it be a software/driver problem?

EDIT
Fixed it... turns out I needed a single-link cable instead of a dual-link, even though dual is supposed to work with both.