Joined
·
93 Posts
So ive been overclocking it with MSI afterburner and stressing with kombuster.
Right now i believe i have it stable after 3 hours of testing ( will do 24 hour run)
Core Clock - 1050MHz
Memory - 1280 MHz
While running Kombuster 68c at 100% load
idles at 35c
One issue though is i cannot adjust the voltage through afterburner? I ticked the box in the setting to allow me to but its still greyed out? I believe the voltage is why is starts getting issues around 1300MHz on memory.

Again are these numbers good? and is the voltage just locked on this card? Would it be wise to increase the voltage so i can overclock harder?
Right now i believe i have it stable after 3 hours of testing ( will do 24 hour run)
Core Clock - 1050MHz
Memory - 1280 MHz
While running Kombuster 68c at 100% load
idles at 35c
One issue though is i cannot adjust the voltage through afterburner? I ticked the box in the setting to allow me to but its still greyed out? I believe the voltage is why is starts getting issues around 1300MHz on memory.
Again are these numbers good? and is the voltage just locked on this card? Would it be wise to increase the voltage so i can overclock harder?