Please post the text on these 2 black IC-s( vmem and GPU )
XFX 8600 GT Vmod
5
Hi guys, i've been searching arround de forum and the net and no answer for my question where founded sooo i saw that one forum member called paradox or so did a guide to mod a xfx 8600 gt but my problem is that my board is not the same so i hope you can help me a little bit
![]()
thanks here are my pics. i've been tying some ... i don't know where to apply the pencil
![]()
(for now only vcore) thanks
![]()
![]()
![]()
i've not done anything because 1029 ohm is not what others have... anyway i hope you can help me thanks
i've not done anything because 1029 ohm is not what others have... anyway i hope you can help me thanks
1 - 18 of 18 Posts
2
Quote:
Did you mean this? if not, point to me, thanks
![]()
1 & 2
apw7067n
mk2ee
3
83k3yyk g4
act08
Originally Posted by Andr3az Please post the text on these 2 black IC-s( vmem and GPU ) |
1 & 2
apw7067n
mk2ee
3
83k3yyk g4
act08
4
Quote:
here you are
![]()
Quote:
![]()
![]()
Please where I have to put the DMM, at 20k? and how can i measure de green points? pointing them i measured 0.08 with 200 selected on the DMM I think thats wrong. What I have to point with the DMM?
thanks
Originally Posted by CL3P20 ..If possible, can you post a nekked pic of the front side please..I would like to see where the power phases are located for vMEM and vGPU..tnx |
Quote:
| Here's the the data sheet for apw7067n Pin #4 Measure the resistance of the pin marked green. Also, test for continuity between the end of the green marked resistor. Can you take a closer pic of the IC in the top left? |
Please where I have to put the DMM, at 20k? and how can i measure de green points? pointing them i measured 0.08 with 200 selected on the DMM I think thats wrong. What I have to point with the DMM?
thanks
Well I measured the 4th pin and the ground (first pin) in the IC and measured 1029 with 2000 selected on the DMM and I measured the resistor and it gives me nothing on the DMM. Is this right?
thanks
![]()
thanks
Doesnt sound right..maybe you just werent getting good contact..
![]()
pin4 is definitely right..as is the locations you are looking at. Mod will work for vMEM the same way too.
2
Quote:
So I have to pencil only the resistor pointed green?
Originally Posted by CL3P20 Doesnt sound right..maybe you just werent getting good contact..
|
2
Quote:
Pencil is risky. Have you confirmed that the resistor marked green is connected to pin #4? Get a resistance value and we will be able to tell you what size VR you will need.
For mem, this is the pin you need to measure for resistance. Also need you to test for continuity between the pin and one of these resistors. I can't tell from the pic which one it is connected to.
Originally Posted by xtyp So I have to pencil only the resistor pointed green? |
For mem, this is the pin you need to measure for resistance. Also need you to test for continuity between the pin and one of these resistors. I can't tell from the pic which one it is connected to.
5
Quote:
All of the measures were done in 20k
![]()
![]()
![]()
![]()
thanks
Originally Posted by PizzaMan Pencil is risky. Have you confirmed that the resistor marked green is connected to pin #4? Get a resistance value and we will be able to tell you what size VR you will need. For mem, this is the pin you need to measure for resistance. Also need you to test for continuity between the pin and one of these resistors. I can't tell from the pic which one it is connected to. |
thanks
Quote:
Please, How can I do that?
Originally Posted by PizzaMan Did you test for continuity to make sure that the pin is connected to the resistors you measured? |
continuity = touching probes makes 'beep'
![]()
...works excellent for tracing point-point.
...works excellent for tracing point-point.
please, what i have to select?
thanks
2
Oh thats is what I thougt first. Thanks, my DMM doesn't make any sound It makes this in the images below...
This is disconected
![]()
and this is conected, what do you think? it has continuity?
![]()
thanks
This is disconected
and this is conected, what do you think? it has continuity?
thanks
1 - 18 of 18 Posts
