[alpsie]

I have a question, and hope you guys can help me out.

I´m running 2x XFX HD 6870 in crossfire, when I hook it up to my tv with a HDMI cable the picture looks to be downscaled.
There is a black bar all around the displayed picture, how do I make it scale up to use the whole tv screen.

The tv I´m using is a Panasonic G20 plasma.

 

[nerdybeat]

I have my single (installing 2nd 6870 this week for CF) 6870 hooked into my 40" Samsung right now. At first mine had cut off a bit of the sides of my desktop. I had to go into the TV settings to get it to properly read the input . Even though it's made for 1080p, you will likely have to adjust a setting in the TV for it to properly display. Check under the scaling or screen fit/display settings and try "fit to screen" or something. (all tv vendor settings UIs are different =P)

 

[t-ramp]

There's a scaling options page under the "My Digital Flat Panels" section of CCC. I always have to drag the slider to the right to fill the screen.

 

[Sodalink]

There should be an option under CCC I think or your TV might have an option too to fit image to screen, but that might just stretch the image.

 

[trulsrohk]

Catalyst conrrol center scaling as mentioned. Sometimes tvs have a scaling thing you can work with but 95% of the time in my experience you have to scale up with radeon gpus. They just show up that way on the majority of sets I have hooked them up to

 

[alpsie]

Thank you very much

+rep