Overclock.net › Forums › Cooling › Water Cooling › OCN Aquaero Owners Club
New Posts  All Forums:Forum Nav:

OCN Aquaero Owners Club - Page 829

post #8281 of 11400
I've been playing around with Aquasuite ... experimenting with different page layouts, looks, etc. Once I have put together the info I want, I plan to slap it on my desk top so that it is nearly always available.

There are some good suggestions and ideas floating around (google images) ... but one thing that I haven't seen is a chart that shows multiple items. All the charts just show one item (temp, flow, RPMs, etc). Can you put together a chart that shows ...

- ambient temp
- water temp
- cpu temp

post #8282 of 11400
Quote:
Originally Posted by ruffhi View Post

I've been playing around with Aquasuite ... experimenting with different page layouts, looks, etc. Once I have put together the info I want, I plan to slap it on my desk top so that it is nearly always available.

There are some good suggestions and ideas floating around (google images) ... but one thing that I haven't seen is a chart that shows multiple items. All the charts just show one item (temp, flow, RPMs, etc). Can you put together a chart that shows ...

- ambient temp
- water temp
- cpu temp


I make a graph of what I want. I make the background of the graph transparent. Set the graph up the way I want it and assign a source. After that I just copy and paste the graph. change the graph to the next source and drop it right on top of the original graph. It works best if all of the temp scales are the same. There maybe an easier way to do it, this is just how I do it.

I attached an image of an old control panel. You can see the different graph I created using this process.

Project #2
(34 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7-4790k ASUS Maximus Formula VII  ASUS GTX780-DC2OC-3GD5 G-SYNC Support GeForce G... CORSAIR DOMINATOR GT DDR3 2133 
Hard DriveHard DriveHard DriveHard Drive
ocz vertex 4 OCZ 460 WD Black Hitachi Deskstar 
CoolingCoolingCoolingCooling
Aquacomputer aquaero 6 PRO  Aquacomputer aqualis XT 2 EK-DDC Heatsink Housing for DDC pumps  Aquacomputer aquacover dual DDC 
CoolingCoolingCoolingCooling
Aquacomputer flow rate sensor mps flow 400 aquacomputer filter with stainless steel mesh 2 Aquacomputer inline temp sensor 3 Aquacomputer temp sensor 
CoolingCoolingCoolingCooling
EK 12mm OD Solid Tube - Clear Bitspower Multi-Link Adapter 12mm Bitspower True Silver Stop Fitting  2 Swiftech MCP35X  
CoolingCoolingCoolingCooling
EK-FC780 GTX DCII - Nickel EK Monarch Series X4 Ram Clean CSQ Nickel 2 XSCP RX360 v2 1 XSCP RX240 v2 
CoolingCoolingCoolingOS
8 Noisblocker M12-P PWM 1000-2000 RPM 2 360mm, 1 240mm XSCP Radiator Gaskets 3 Phobya Nano-G 14 Black Silent PWM Fan Win 7 Pro 
MonitorKeyboardPowerCase
Samsung SyncMaster P2450H Logitech G15 Corsair AX850 Caselabs Mercury S8 & Pedestal 
MouseAudio
Logitech G9 On board RealTek HD 
  hide details  
Reply
Project #2
(34 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7-4790k ASUS Maximus Formula VII  ASUS GTX780-DC2OC-3GD5 G-SYNC Support GeForce G... CORSAIR DOMINATOR GT DDR3 2133 
Hard DriveHard DriveHard DriveHard Drive
ocz vertex 4 OCZ 460 WD Black Hitachi Deskstar 
CoolingCoolingCoolingCooling
Aquacomputer aquaero 6 PRO  Aquacomputer aqualis XT 2 EK-DDC Heatsink Housing for DDC pumps  Aquacomputer aquacover dual DDC 
CoolingCoolingCoolingCooling
Aquacomputer flow rate sensor mps flow 400 aquacomputer filter with stainless steel mesh 2 Aquacomputer inline temp sensor 3 Aquacomputer temp sensor 
CoolingCoolingCoolingCooling
EK 12mm OD Solid Tube - Clear Bitspower Multi-Link Adapter 12mm Bitspower True Silver Stop Fitting  2 Swiftech MCP35X  
CoolingCoolingCoolingCooling
EK-FC780 GTX DCII - Nickel EK Monarch Series X4 Ram Clean CSQ Nickel 2 XSCP RX360 v2 1 XSCP RX240 v2 
CoolingCoolingCoolingOS
8 Noisblocker M12-P PWM 1000-2000 RPM 2 360mm, 1 240mm XSCP Radiator Gaskets 3 Phobya Nano-G 14 Black Silent PWM Fan Win 7 Pro 
MonitorKeyboardPowerCase
Samsung SyncMaster P2450H Logitech G15 Corsair AX850 Caselabs Mercury S8 & Pedestal 
MouseAudio
Logitech G9 On board RealTek HD 
  hide details  
Reply
post #8283 of 11400
@apw63 ... excellent. Thanks for the reply.

+REP
post #8284 of 11400
You can also use the aquasuite logging function... it allows multiple variables to be charted, and/but each variable will show it's associated Y axis.

I had one set to show the output power from my PSU vs. the loop's temperature... interesting correlation smile.gif
Unfortunately my system is down atm and I cannot post a screen shot.
Edited by InfoSeeker - 8/11/16 at 3:03pm
post #8285 of 11400
So I got my Aquaro 6 yesterday and have been playing around with it having 4 PWM fans directly connected to it. Works great.

So today I put the Silverstone SST-CPF04 on fan channel 1 and connected a bunch of PWM fans to the hub. They are all running at full RPM and no RPM is being reported back to aquasuite, and I'm unable to control their speed.

I was under the impression this particular hub was compatible. This one:



Fans connected:



And the 2 wire cable going to the controller for RPM and PWM signals (or so I thought).



All 4 fan channels are already set to PWM and everything was working great with the fans connected directly to the controller.

Defective Silverstone, or?
Edited by pclausen - 8/12/16 at 12:12pm
post #8286 of 11400
Moved to fan channel #2 and I can control the speed, but still no RPM being reported back. Blew away the curve I had configured on fan channel #1 and switched back to it. Can control speed there now as well, but no RPM being reported.
post #8287 of 11400
If I recall correctly the problem with the Silverstone hub is that all rpm wirers are reporting which makes for a big mess inside the controller, essentially you should cut off all but one of the rpm reporting pins. But dont quote me on all this.

EDIt: nevermind, this was with the nzxt grid hub, but maybe it also goes for this one thinking.gif
post #8288 of 11400
Quote:
Originally Posted by pclausen View Post

So I got my Aquaro 6 yesterday and have been playing around with it having 4 PWM fans directly connected to it. Works great.

So today I put the Silverstone SST-CPF04 on fan channel 1 and connected a bunch of PWM fans to the hub. They are all running at full RPM and no RPM is being reported back to aquasuite, and I'm unable to control their speed.
Warning: Spoiler! (Click to show)

I have that exact fan hub ... and I can see exactly what the issue is.

In the above picture, you have 7 fans connected to an 8 fan hub. You managed not to use the outlet that is the most critical. See the top right outlet ... see how it looks a little different than the rest? That is the one outlet that reports RPMs.
post #8289 of 11400
Quote:
Originally Posted by ruffhi View Post

I have that exact fan hub ... and I can see exactly what the issue is.

In the above picture, you have 7 fans connected to an 8 fan hub. You managed not to use the outlet that is the most critical. See the top right outlet ... see how it looks a little different than the rest? That is the one outlet that reports RPMs.

Good eye captain! thumb.gif

I was scratching my head with this one earlier thinking he might have not set the channel to PWM but he had stated that he did that already.
Nostalgia 3.0
(14 items)
 
Nostalgia v2.2
(41 photos)
Nostalgia 2.0
(31 items)
 
CPUMotherboardGraphicsRAM
i7-950 Intel X58SO GTX 680 Hydro Copper Corsair Vengeance 12GB 
Hard DriveHard DriveHard DriveHard Drive
WD VelociRaptor 10k x2 (Raid0),  SanDisk ReadyCache  WD Black 1.5TB Storage WD Black 1.5TB Storage 
Optical DriveOptical DriveCoolingCooling
Sony Lightscribe DVD Burner Pioneer Blu-ray Burner Corsair Link Koolance QDC (VLN4) 
CoolingCoolingCoolingCooling
PrimoChill Advanced LRT (1/2 ID 3/4 OD) Swiftech Helix120 PWM Fans (x7) Swiftech Apogee XT Rev. 2 Black Ice GT Stealth 120mm (Pull) 
CoolingCoolingCoolingCooling
Black Ice SR1 360mm (Push/Pull) Swiftech Maelstrom-35X2  Koolance Flow Meter Adapter With Display Phobya Temp Sensor Coupler 
CoolingOSMonitorMonitor
Bitspower Compression Fittings (1/2 ID 3/4 OD) Windows 7 64bit ASUS VS248H-P 24" 2ms LED ASUS VS248H-P 24" 2ms LED 
MonitorKeyboardPowerCase
ASUS VS248H-P 24" 2ms LED Corsair Vengeance K90 Corsair AX1200i  Corsair 800D 
MouseMouse PadAudio
Corsair M60 Corepad C1-Series Premium Cloth Mousepad - Larg... Bose Companion 5 
  hide details  
Reply
Nostalgia 3.0
(14 items)
 
Nostalgia v2.2
(41 photos)
Nostalgia 2.0
(31 items)
 
CPUMotherboardGraphicsRAM
i7-950 Intel X58SO GTX 680 Hydro Copper Corsair Vengeance 12GB 
Hard DriveHard DriveHard DriveHard Drive
WD VelociRaptor 10k x2 (Raid0),  SanDisk ReadyCache  WD Black 1.5TB Storage WD Black 1.5TB Storage 
Optical DriveOptical DriveCoolingCooling
Sony Lightscribe DVD Burner Pioneer Blu-ray Burner Corsair Link Koolance QDC (VLN4) 
CoolingCoolingCoolingCooling
PrimoChill Advanced LRT (1/2 ID 3/4 OD) Swiftech Helix120 PWM Fans (x7) Swiftech Apogee XT Rev. 2 Black Ice GT Stealth 120mm (Pull) 
CoolingCoolingCoolingCooling
Black Ice SR1 360mm (Push/Pull) Swiftech Maelstrom-35X2  Koolance Flow Meter Adapter With Display Phobya Temp Sensor Coupler 
CoolingOSMonitorMonitor
Bitspower Compression Fittings (1/2 ID 3/4 OD) Windows 7 64bit ASUS VS248H-P 24" 2ms LED ASUS VS248H-P 24" 2ms LED 
MonitorKeyboardPowerCase
ASUS VS248H-P 24" 2ms LED Corsair Vengeance K90 Corsair AX1200i  Corsair 800D 
MouseMouse PadAudio
Corsair M60 Corepad C1-Series Premium Cloth Mousepad - Larg... Bose Companion 5 
  hide details  
Reply
post #8290 of 11400
I am looking to buy a 6xt this weekend, can u guys point me in the direction of where I can get a 3 pin fan hub that can support at least 7 fans. Also I want to verify from what I have read I think this is correct but this controller can control 3pin fans correct non pwm? I have quite a few corsair AF fans in my sma8, I want to control my two loops separate and than the case fans separate. Pretty much 7-140mm fans for gpu, 4-120mm. Fans for cpu and than 4-120 case fans. What would be the best way with hubs to do this?


Sent from my iPhone using Tapatalk
Slimer
(16 items)
 
  
CPUMotherboardGraphicsGraphics
Intel i9 7900x Asus Rampage VI Apex Asus Strix OC 1080Ti Asus Strix OC 1080Ti 
RAMHard DriveHard DriveCooling
G.Skill TridentZ RGB Samsung 960 PRO M.2  Samsung 850 EVO x2 Raid 0 Custom Water Cooled 
OSMonitorKeyboardPower
Windows 10 64bit AOC Agon AG352UCG Sentraq S60-X RGB 60% EVGA 1300 G2 
CaseMouseMouse PadAudio
Caselabs SMA8 Nixeus Revel Logitech G440 Sennheiser GSX1000 
  hide details  
Reply
Slimer
(16 items)
 
  
CPUMotherboardGraphicsGraphics
Intel i9 7900x Asus Rampage VI Apex Asus Strix OC 1080Ti Asus Strix OC 1080Ti 
RAMHard DriveHard DriveCooling
G.Skill TridentZ RGB Samsung 960 PRO M.2  Samsung 850 EVO x2 Raid 0 Custom Water Cooled 
OSMonitorKeyboardPower
Windows 10 64bit AOC Agon AG352UCG Sentraq S60-X RGB 60% EVGA 1300 G2 
CaseMouseMouse PadAudio
Caselabs SMA8 Nixeus Revel Logitech G440 Sennheiser GSX1000 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › OCN Aquaero Owners Club