Overclock.net banner

8600gt oc very hot

2.4K views 30 replies 13 participants last post by  shaggy56  
#1 ·
My 8600gt is running at 875/900(1.8ghz), idle its ok, but if I scan for artifacts in atitool or play a demanding game the whole card even the pcb gets very hot, I can still hold my fingers on it as long as I want but any hotter and i wouldn't be able to, I know its over clocked pretty high and the core and memory should be hot but Is it abnormal for the whole card, every inch of it to be hot like this? Am i going to kill it if i keep running it at this speed, I don't mind if it shortens the lifespan, I only want maybe 1 year out of it.

under load the gpu is @ 70c,
 
#14 ·
Quote:

Originally Posted by Bear View Post
that is odd..when i switched to my zalman i dropped to 37-38 idle and 50-52 under load...

but as far as the card i can touch mine and it isnt that hot
It's not hot most of the time, only when i play a game or run the scan for artifacts. your is clocked pretty high, did you try touching the pcb when its being stressed?

Quote:

Originally Posted by nick69 View Post
The temperature is fine but please dont touch the pcb when the card is active. You run the risk of shorting it out!!
I have to touch it to see how hot it is, but i do touch some metal on the case before i do.
 
#19 ·
Quote:

Originally Posted by Jakg View Post
100°?! are you mad?

I wouldn't want an 8600GT/GTS breaking 80°, so yours should be fine

Quote:

Originally Posted by Jakg View Post
then *** was the point in posting? My vid card works fine at 110°, ergo it's a fine temp, even though it will kill it
Because they rate the 8 series on the spec sheets safe until 100C. Doh? Maybe do some research before calling people mad.

70C is very safe, you have nothing to worry about.
 
  • Rep+
Reactions: RandomGuy
#20 ·
I'm not really worried about the core, I'm worried about the rest of the components on the card, cause the hole card is getting damn hot,

Anyway I have it at 900/900 and under load it's hitting 76c
I already have the voltage at 1.72v, you think I can give it more voltage or is that too much?
 
#22 ·
Quote:
Anyway I have it at 900/900 and under load it's hitting 76c
I already have the voltage at 1.72v, you think I can give it more voltage or is that too much?
Open the case up as much as you can and blow on it really hard and I bet 1 ghz should be possible. Thats one bullet proof card.
 
#24 ·
Quote:


Originally Posted by MrBungle
View Post

GPUs are made to run hotter than CPUs. a lot of high end Radeon owners would love to have their cards top out at only 70°C.

PS you really shouldn't touch the PCB while the computer is on. humans conduct electricity and you can short something out on your card.

I had a X1950 pro and it ran at 64c load. That is even being overclocked to 660/1450
 
#25 ·
Quote:


Originally Posted by RandomGuy
View Post

Its not the stock cooler, i have a iceberq6,

I'm just wondering is the whole card suppose to get so hot, i can touch anywhere on the card and its really hot, and the ramsinks under load are so hot I can barely keep my fingers on there.

My 7900GS loaded gets hot you don't even have to touch it to feel the heat coming off of it but the load temp is only 61c on it.It has been running like that for months now without a problem so i wouldn't worry about it.