Overclock.net banner
1 - 19 of 19 Posts

Playglue

· Registered
Joined
·
55 Posts
Discussion starter · #1 ·
Hi right now im building a new computer and i want to test it out to see if it can turn on with only a motherboard and psu. I have all the psu plugs in the motherboard and the light flashing says it is on, but the psu fan and my case fans arent even working? Is the a problem with my motherboard or psu?
 
Most computers wont do anything without a CPU installed, period, you at least need a CPU, you could get by without RAM if you were testing to see if everything at least turns on...
 
Discussion starter · #3 ·
okay thanks, but the fans arent working either T_T I have a nzxt phantom case but none of the fans are turning on! There are 5 fans which is powered by 1 molex it is connected to the psu but it is not working.
 
Quote:
Originally Posted by Playglue View Post

what does hsf mean? sorry im new at this stuff
Heatsink, fan. On the CPU.
 
to test the fans you can short the PSU to turn it on by using a paperclip to jump the green and black wires. That actually turns the power on to the PSU
 
Best to just plug the fans into the psu, jump the psu, and then test them out. If they power on the board or maybe just the connector on board is shot

Sent from my SAMSUNG-SGH-I897 using Tapatalk
 
Your speaker connection is the 4 pins in the top right of where you plug in your front panel wires.

Untitled-2.png
 
no. Did your case come with a separate speaker?
 
Quote:
Originally Posted by Playglue View Post

nope i do not have one of those
frown.gif
Should have been in the accessory box that came with the case that has all the screws and stuff inside.
 
Quote:
Originally Posted by Playglue View Post

Thank you so much! i found it haha
Your welcome.
 
1 - 19 of 19 Posts