Overclock.net banner
1 - 12 of 12 Posts

kaistledine

· Registered
Joined
·
2,008 Posts
Discussion starter · #1 ·
Hello forum !

So im playing the new wolfensteine when I get some weird lag loading textures . On opening MSI after burner I see this ...



I've rebooted and After a while playing It got stuck at 440Mhz ... The only thing I did recently was do a clean install / uninstall of the drivers . I'm going to do another one as we speak .
If you change the core clock in MSI after burner it doesn't change it stays at the low clock .

Specs

CPU: phenom ii x6 1100T 4.1 ghz
RAM: crosshair vengance low profile 16GB
Mobo: Crosshair IV formula
GPU: GTX 970 Inno3D hercluez x4
CPU cooler:Noctua d14
Case: NZXT Phantom 630
PSU:Corsair HX850

Any ideas ?
 
try going to nvidia control panel and set prefer max performance and single display performance mode. or try a different driver, 350.05 for example.
 
Sometimes completely removing drivers and afterburner helps. Then reboot, install drivers. Reboot, then install afterburner again. Make sure you delete anything in c:/program Files (x86)/msi afterburner/profiles before trying to overclock again.
 
Discussion starter · #8 ·
Quote:
Originally Posted by VdbN View Post

Doesn't +X indicate that it's running an overclock? Bad Overclock?
I removed the O.C . I couldnt re O.C it as it seem to be locked .

I've managed to get it back to normal then it blue screened....now its stuck at 1177mhz again ...
 
Quote:
Originally Posted by kaistledine View Post

Right so when gaming it went back to normal clocks ( 1550 ) then dropped randomly to 405Mhz.....Now it wont move again .
Revert to stock clocks, reboot and test there. My guess is that your overclock is severely unstable.
 
yeah worst case too, when clocks get stuck and you need to reboot for them to be normal again
 
1 - 12 of 12 Posts