Overclock.net banner
Cancel
Create thread New Forums

[Bios Mod] ROG Strix X570-E/F/I Gaming

Jump to Latest
41 - 60 of 832 Posts
#41 ·
#42 ·
Quote:
Originally Posted by gupsterg View Post

Dude that was 3 weeks+ ago, link. At that time and prior he had not tested BGSA, link
tongue.gif
.

Later he has and given his thoughts, so as those were the latest and best I had them in OP of my thread
tongue.gif
, link , link.

I do try not to misguide members
wink.gif
.
Click to expand...
Thanks

Didn't follow Crosshair thread until lately, so I am behind
smile.gif


Do you know any timing which can relax copying side? All my errors just relate to copying when I did my Memtest
 
Save
Reply Quote Rep+ Rep+
#43 ·
What means 2DCP Single Ranked memory? And what vcore, llc settings are you using on the 1700/1700x/1800x to get 3.9-4.0 ghz stable on this bios? Because i can't get 3.9 stable on my 1700 on 0805 bios with 1.4 vcore and llc set to lvl 2, other settings are not changed.
 
#46 ·
Quote:
Originally Posted by o0ze View Post

Is it my unlucky chip or is it something with the settings?
Click to expand...
900mhz = 30% oc... Not bad chip, but if you want more try to undervolt SOC.

High voltage in SOC stress your processor.

My SOC is stable with 0.994v (LLC1 and 110% capability energy... and cpu/soc phases in extreme with 600hz)

SOC voltage default = 0.900v
With some rams profile = 1.1v

some Ryzen 7 need 1.4 (or more) for 4ghz.

Ps: check your PCH temp, if is too high install a fan.

What is your CPU temp?
cooler?
 
#47 ·
Quote:
Originally Posted by ZeNch View Post

900mhz = 30% oc... Not bad chip, but if you want more try to undervolt SOC.

High voltage in SOC stress your processor.

My SOC is stable with 0.994v (LLC1 and 110% capability energy... and cpu/soc phases in extreme with 600hz)

SOC voltage default = 0.900v
With some rams profile = 1.1v

some Ryzen 7 need 1.4 (or more) for 4ghz.

Ps: check your PCH temp, if is too high install a fan.

What is your CPU temp?
cooler?
Click to expand...
I can't even get 3.9 on 1.4 vcore lvl2 llc, that's the problem and i don't think it's related to soc voltage or pch temps (that are are quite normal). What settings do you use for your ocing (vcore/llc/multiplier)?
 
#49 ·
Quote:
Originally Posted by o0ze View Post

What means 2DCP Single Ranked memory?
Click to expand...
1 DPC = 1 dimm per channel ie only 2 slots used on motherboard.

2 DPC = 2 dimms per channel ie 4 slots used in motherboard,

Single rank ram tends to be:-

i) single sided, so view your RAM down the heatspreaders from the end where you insert into motherboard.

ii) less than 16GB size dimm.

You can also use Thaiphoon Burner to read SPD of RAM. Reference red line in below image, 1R = single rank, 2R = dual rank.

 
#50 ·
Quote:
Originally Posted by o0ze View Post

I can't even get 3.9 on 1.4 vcore lvl2 llc, that's the problem and i don't think it's related to soc voltage or pch temps (that are are quite normal). What settings do you use for your ocing (vcore/llc/multiplier)?
Click to expand...
my OC is low (20% with stock cooler).
my speeds@vcore:
3800@1.35v
3600@1.194v
3.2@1v (Ecofriendly
tongue.gif
)

your chip can or cant get 4ghz, but do you need to try.

PCH temp "normal"= 50-70c idk the max but i want to low this, the GPU temp affect directly.
SOC vcore high = bad oc (sttessed cpu)
SOC vcore low = bad oc (no stable)
you need to find your SoC voltage for better oc and low temps.

(SoC Voltage affect your RAM stability)

in other post other users recommend:
Phases in Extreme
Phases speed in manual: 600mhz
LLC 1to3
Vcore Fix
CPU temp max: 95 I THINK but AMD include a offset temp i dont know if 95 is with or without this offset (Only ryzen 7).
SoC voltage exact no More no less.

use hwinfo64 for view temps voltages and other info.
 
#51 ·
Good work, @Reous. Did you used AMIBCP v5 to edit the bios? (Default/USER policy trick?)
I have another ASUS motherboard and it also lack a lot of setting which you have enabled for prime x370.
I'll try to mod the bios too, thatnks for the inspiration ^^
 
Save
Reply Quote Rep+ Rep+
Discussion starter · #59 ·
Quote:
Originally Posted by NikeFreak View Post

CrashFree BIOS 3 will not help?
Click to expand...
Quote:
Originally Posted by NikeFreak View Post

You when for yourself did (Asus Prime X370-Pro) there were unsuccessful cases?
Click to expand...
CrashFree wont help in every case.
My worst case was that some menus just went away :d

What do you want? Only the CBS settings?
 
41 - 60 of 832 Posts
About this Discussion
831 Replies
117 Participants
Last post:
NikeFreak
Overclock.net
posts
28M
members
562K
Since
2004
The premier forum for overclocking experts and enthusiasts. Discuss hardware optimization, custom builds, benchmarking, cooling solutions, and pushing the boundaries of computing performance. From beginner guides to extreme overclocking, join our technical community to master system tuning.
Full Forum Listing
Explore Our Forums
Intel CPUs Hardware News NVIDIA PC Gaming Water Cooling