I need a closeup of the power, hd, power led speaker ect. I can't read what the mb says. Is this a std thing. If so point me to a clear schematic. it lacks some white spray and makes the letters real difficult to read. thanks
Asrock Z270 Extreme 4 front panel header schematic
1 reading
Rodinaz
1 - 4 of 4 Posts
Joined
·
14,166 Posts
Joined
·
14,166 Posts
Quote:
When the Reset button is pressed, current is momentarily sent to the motherboard reset circuit, and the motherboard shuts down and then restarts.
When the Power button is pressed, current is momentarily sent to the motherboard start up circuit, and the motherboard starts the post routine.
If the Power button is held in for longer than 4 seconds and a continuous current is sent to the motherboard shut down circuit, the motherboard does a forced shut down.
No. the power and reset circuits are not powered all the time. They are momentarily powered to actuate them. The power/reset switches are momentary contact switches:Originally Posted by Rodinaz
Yes I know but as I said my MB lacks clarity. By this diagram on Panel 1 it looks like the lower far right gnd pin is left open? I have the ground for the reset switch connected there.
When the Reset button is pressed, current is momentarily sent to the motherboard reset circuit, and the motherboard shuts down and then restarts.
When the Power button is pressed, current is momentarily sent to the motherboard start up circuit, and the motherboard starts the post routine.
If the Power button is held in for longer than 4 seconds and a continuous current is sent to the motherboard shut down circuit, the motherboard does a forced shut down.
1 - 4 of 4 Posts
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
