Overclock.net banner
Cancel
Create thread New Forums

Overclocking 11700k/11900k results, bins and discussion

2 reading
Jump to Latest
1,501 - 1,520 of 7,348 Posts
#1,501 · (Edited)
Falkentyne said:
Nice scores. But
1.65v DDR voltage? Isn't that really high for 4266? Or was that a typo?
What were your Mem VCCIO and VCCSA set to?
Click to expand...
I just set 1.65V on memory to see how high I could boot, 4533 booted, but wasn't remotely stable, so I went back to 4266 to see if I could get something bench-stable. The sticks are watercooled, so it's not like I'll meet the typical temperature issues B-die users typically get at 1.65V
And it's dual rank B-die, which doesn't clock all that high.

I think I set 1.3V VCCSA and 1.4V VCCIO MemOC, going 1.45/1.55 didn't help stability for 4533. Again I didn't really bother trying to minimize voltage, I just picked values slightly higher than what booted on auto settings (4266) to see if I could push higher.

EDIT:
17K in Cinebench R23!
And 370W Package power 🔥

I now see my system time is off, but I have to get myself some dinner now!

2485115
 
  • Rep+
Reactions: i9forever and Falkentyne
Save
Reply Quote Rep+ Rep+
#1,502 ·
Discussion starter · #1,503 · (Edited)
Save
Reply Quote Rep+ Rep+
#1,504 ·
Arni90 said:
I just set 1.65V on memory to see how high I could boot, 4533 booted, but wasn't remotely stable, so I went back to 4266 to see if I could get something bench-stable. The sticks are watercooled, so it's not like I'll meet the typical temperature issues B-die users typically get at 1.65V
And it's dual rank B-die, which doesn't clock all that high.

I think I set 1.3V VCCSA and 1.4V VCCIO MemOC, going 1.45/1.55 didn't help stability for 4533. Again I didn't really bother trying to minimize voltage, I just picked values slightly higher than what booted on auto settings (4266) to see if I could push higher.

EDIT:
17K in Cinebench R23!
And 370W Package power 🔥

I now see my system time is off, but I have to get myself some dinner now!

View attachment 2485115
Click to expand...
Holy crap.
I cranked out your terts with my primaries and corked this out.
No idea if stable yet. I'm at 1.5v. Going to run prime95 large FFT and see if threads start crashing.

2485117
 
  • Rep+
Reactions: morph., Talon2016 and Steno22
Save
Reply Quote Rep+ Rep+
#1,505 ·
For those of you experienced swapping motherboards... Do you think I can expect to get the same cpu OC on this Z590 hero as I currently am getting on the Z490 msi godlike?

The hero has 2 less phase so I don't know. Wondering what you guys have seen from experience.
 
#1,506 ·
Image

Received some nice tertiaries.Works well and pases google stressapptest.

A nicer DR DJR sample would probably do 4533 or 4800 at better CAS.

I can see how some of these $160 (before taxes) pairs of 32GB go well with a i7-11700K build on a tighter budget.
 
  • Rep+
Reactions: aznguyen316
Save
Reply Quote Rep+ Rep+
#1,507 · (Edited)
I just sold my AMD stuff and bought a rog strix z590-e gaming and a 11900k
I just installed it last night and went through some preliminary testing
SP on the cpu is 82 ,I think 139 on the cooler
Temps are fine on the h150 pro in temp settings , I get 5.3 encore clocks I'm using 3600 b dies at stock settings right now 16 16 16 36 1T

My only issue that I have so far is random crash to desktop on games like after an hour or so
When I used to have an x299
I would just increase system agent voltage a little bit that would get rid of it would apply in a situation like this,or or is there something else that someone can think of that would be an easy fix
Everything else seems to be fine it works real well
I've been out of the Intel loop for a little bit of time I'm back in now with the 11 series
Thank you
 
Save
Reply Quote Rep+ Rep+
#1,508 ·
bigcid10 said:
I just sold my AMD stuff and bought a rog strix z590-e gaming and a 11900k
I just installed it last night and went through some preliminary testing
SP on the cpu is 82 ,I think 139 on the cooler
Temps are fine on the h150 pro in temp settings , I get 5.3 encore clocks I'm using 3600 b dies at stock settings right now 16 16 16 36 1T

My only issue that I have so far is random crash to desktop on games like after an hour or so
When I used to have an x299
I would just increase system agent voltage a little bit that would get rid of it would apply in a situation like this,or or is there something else that someone can think of that would be an easy fix
Everything else seems to be fine it works real well
I've been out of the Intel loop for a little bit of time I'm back in now with the 11 series
Thank you
Click to expand...
Just an idea, your score for the h150 is low, do you have properly mounted the cooler? Your score should be at least 160-170+, I would remove the cooler, clean/repaste you know the drill, and seat the cooler again.
 
#1,509 ·
i9forever said:
Just an idea, your score for the h150 is low, do you have properly mounted the cooler? Your score should be at least 160-170+, I would remove the cooler, clean/repaste you know the drill, and seat the cooler again.
Click to expand...
I'm sorry,I made a mistake on the cooler part
It was 181
 
  • Rep+
Reactions: i9forever
Save
Reply Quote Rep+ Rep+
#1,510 ·
Bilco said:
For those of you experienced swapping motherboards... Do you think I can expect to get the same cpu OC on this Z590 hero as I currently am getting on the Z490 msi godlike?

The hero has 2 less phase so I don't know. Wondering what you guys have seen from experience.
Click to expand...
14 phases * 90A = 1260A. Considering the 40~50% efficiency range would be 630A, far enough for the i9.

My M13H will arrive on Monday. I will check how it would go with 11900K.
 
  • Rep+
Reactions: owikh84
Save
Reply Quote Rep+ Rep+
#1,511 ·

Attachments

  • Rep+
Reactions: i9forever
Save
Reply Quote Rep+ Rep+
#1,513 ·
Any idea if this RAM might be DJR?

Patriot Viper 4 Blackout Series 16GB (2 x 8GB) 288-Pin DDR4 SDRAM DDR4 4400 (PC4 35200) Intel XMP 2.0 Desktop Memory Model PVB416G440C8K

Didn't come up much with google with the model. Only a review comparing to the Klevv which I can't find in the US.

Otherwise, the next kit that's cheapest is F4-4400C18D-16GVKC which I think is DJR with the C at the end of the SKU which @cstkl1 mentioned before.

Don't care to spend too much more for ram just to mess around with since I am using 2x16GB bdie right now.
 
#1,514 ·
VKC is the suffix for JEDEC 2666 bin on SK-Hynix chip.
 
Save
Reply Quote Rep+ Rep+
#1,515 ·
Question:

11900K, z590 Aorus Ultra, 14-15-15-35 3600 @ 1.45V (default for this kit)

I manually set my vcore in BIOS to 1.3, but my VROUT/Vcore HWinfo / CPUz is saying it's jumping between either ~0.8 <-> 1.45?

Am I missing something??
 
#1,516 ·
Nizzen said:
Can I be on that list to? For me it's hard to get 4533mhz work with 2x16 b-die. The same kit does 4700 on 10900k. 4266c17 2x16. Strange. Hynix kit does 5600mhz, so can't be the IMC? Maybe Dualrank on Rocketlake is hard?
Click to expand...
err no. hmm every time theres a new mrc code
bdie dr seems to go whack somewhere and improves something else
Nizzen said:
Pleace help me with copy :) I haven't figured out that yet...

View attachment 2485107
Click to expand...
ok will pass the 4533 setting in an hour.. havent retested it on the current bios.
 
#1,517 ·
Good way to find out the IC type:
MSI's Memory QVL

MSI USA

Welcome to the MSI USA website. MSI designs and creates Mainboard, AIO, Graphics card, Notebook, Netbook, Tablet PC, Consumer electronics, Communication, Barebone, Server, industrial computing, Multimedia, Clean Machine and Car Infotainment.
us.msi.com us.msi.com

Some product lines may use different ICs depending on batch (usually the mid range and entry corsairs for example)
 
Save
Reply Quote Rep+ Rep+
#1,518 ·
IronAge said:
It is available from a European Etailer:

ASUS ROG MAXIMUS XIII APEX Mainboard - Intel Z590 - Intel LGA1200 socket - DDR4 RAM - ATX

478,32 € Mainboard, ATX, Intel LGA1200 Socket, Intel Z590, 1 x PCI-Express 4.0 x16 (11th Gen) & 1 x PCI-Express 3.0 x16, Dual DDR4-3200 - 2 x DIMM slots, 8 x SATA-600 / 3 x M.2 NVMe PCI-Express 3.0 & 1 x M.2 NVMe PCI-Express 4.0 (2242 / 2260 / 2280), USB 3.2 Gen 2 Type A & C, Intel I225-V 2.5...
www.proshop.de www.proshop.de
Click to expand...
Holy balls, the easter bunny must've visited Proshop warehouse, haha. Ordered one, now just waiting for my 11900K to ship. The gaming benchmarks look pretty dissapointing tbh... My 2019 Z390 setup with single rank memory is actually beating these results, I really want to upgrade but I don't want to spend 1150€ (+450€ for dual rank 4266C17 kit...) to get lower performance, lmao. Maybe the latency from 1:2 just hurts gaming too much and Z590 + 10900K is actually the best for gaming?

Nizzen said:
4400c17 2x16 tweaked

Maybe I need to have a tweaked windows to get higher, or 5950x LOL

Need to compare this results with Hynix memory later.
HT=off
View attachment 2485113
HT=Off
View attachment 2485114
Click to expand...
Font Technology Screenshot Slope Engineering
Font Amber Technology Space Circle
Terrestrial plant Font Rectangle Screenshot Software
 
  • Rep+
Reactions: menko2
Save
Reply Quote Rep+ Rep+
#1,519 ·
Carls_Car said:
Question:

11900K, z590 Aorus Ultra, 14-15-15-35 3600 @ 1.45V (default for this kit)

I manually set my vcore in BIOS to 1.3, but my VROUT/Vcore HWinfo / CPUz is saying it's jumping between either ~0.8 <-> 1.45?

Am I missing something??
Click to expand...
Turn off all power saving stuff and only read VRVOUT from HWiNFO64.
 
Save
Reply Quote Rep+ Rep+
#1,520 ·
Antsu said:
Holy balls, the easter bunny must've visited Proshop warehouse, haha. Ordered one, now just waiting for my 11900K to ship. The gaming benchmarks look pretty dissapointing tbh... My 2019 Z390 setup with single rank memory is actually beating these results, I really want to upgrade but I don't want to spend 1150€ (+450€ for dual rank 4266C17 kit...) to get lower performance, lmao. Maybe the latency from 1:2 just hurts gaming too much and Z590 + 10900K is actually the best for gaming?



View attachment 2485188 View attachment 2485189 View attachment 2485190
Click to expand...
You are getting even better scores than me with 10900k and similar ram. My cpu is at 5.1ghz and yours 5.4ghz but the rest is quite similar.

If things don't change with microcode a i won't upgrade either.

2485198
2485199
 
Save
Reply Quote Rep+ Rep+
1,501 - 1,520 of 7,348 Posts
About this Discussion
7.3K Replies
294 Participants
Last post:
coolhandluke41
Overclock.net
posts
28M
members
562K
Since
2004
The premier forum for overclocking experts and enthusiasts. Discuss hardware optimization, custom builds, benchmarking, cooling solutions, and pushing the boundaries of computing performance. From beginner guides to extreme overclocking, join our technical community to master system tuning.
Full Forum Listing
Explore Our Forums
Intel CPUs Hardware News NVIDIA PC Gaming Water Cooling