Overclock.net banner
1 - 6 of 6 Posts

The_Nephilim

· Registered
Joined
·
608 Posts
Discussion starter · #1 · (Edited)
Hey Guys,

I have an eVGA 2080Ti FTW3 GPU and I was trying to OC it but I noticed my voltage @100% OC only goes to max of 925mV. I would think with this card I would have no such limit on the voltage.

I was reading a thread here and someone stated that maybe said card could have been used for mining but I checked the BIOS of the GPU and model number lined up with what should have been the factory BIOS.

Now I figured I might be able to do a BIOS flash but unsure which one I would use for my GPU.. I did get the memory upto 600mhz so far but the OC doesn't do anything but make the GPU Crash even tho the core clock does not increase..



EVGA RTX 2080 Ti FTW3 Ultra Specs



Font Line Screenshot Electronic device Circle
 
Maybe a dumb question, but are you hitting the power limit? It's probably Something Weird but PL would be an easy explanation.
 
Use the curve editor. I think its the button under the 59C. It's much better. You'll be able to see if your hitting power limit or if the voltage graph stops at 0.925v which is highly unlikely. My GPU hits TDP limit way before I hit any sort of other limit...due to it being a laptop.
 
Some cards are voltage locked, try looking in afterburner settings for unlock voltage.
 
Discussion starter · #5 ·
well I pushed the power setting up to 120 it was not hitting the limit then and the voltage was still low..

I did unlock the voltage setting it did nothing?? I am going to mess around with it a bit more then I am just going to drop it.. I am getting my new GPU today so hopefully that will take care of my issues ;)
 
1 - 6 of 6 Posts