Overclock.net banner
Cancel
Create thread New Forums

[Official] Zen 5 X3D Owner's Club (9800x3D / 9900x3D / 9950x3D)

Tags
3d vcache 9700x3d 9800x3d 9950x3d zen 5
21 reading
Jump to Latest
2,721 - 2,740 of 9,494 Posts
#2,725 ·
domdtxdissar said:
Could you do a enabled/disabled comparison in aida + clam latency and bandwidth ?
Click to expand...
Would if I was still on the BIOS. I'll have to leave the task up to someone else. I'm sure there will be many exploring this new BIOS.

There is one major problem with this BIOS. The boot to boot stability is terrible. At least for me. It will often times fail training after a restart. Even with memory clocked lower with looser timings. Once in Windows everything appears fine though. The problem happens even with the new feature set to Auto.

Back to BIOS 0606 and assured stability.

May revisit this beta BIOS later.
 
  • Wow
  • Helpful
Reactions: domdtxdissar and LtMatt
Save
Reply Quote Rep+ Rep+
#2,728 ·
#2,730 ·
#2,731 ·
Carillo said:
Leaving for work very soon, but this is a quick test of the new Legacy feature in the 3065 bios. The latency improvement is huge in Aida.

Edit: No issues with memory training.

8200 c32 Auto

View attachment 2685393

8200 c32 Legacy mode

View attachment 2685394
Click to expand...
I also managed to squeeze in a couple of GB3 runs. While Legacy mode gives better latency in Aida, it gives worse memory performance in Gb3. 800 points is a lot worse...

Legacy on 16141 points
Azure Font Computer Rectangle Screenshot


Legacy off ( Auto) 16918 points

Product Font Rectangle Software Screenshot
 
#2,734 ·
kyton said:
HI All. Just got my 9800x3d install. Cr23 gave me a score of upper 21000's at stock. idle was 45 deg and max temp was 80deg using a Deepcool Mystique 240mm.

Idle temps this morning were 40 deg. I set Curve optimizer to -20 as -30 would crash Steam, etc. CR23 hit 23254 with max temp 88deg. All core boost was the same as stock at 5218Mhz. Do these figures seem ok. First time on AM5 platform. Board is Asus Strix B650E-F
Click to expand...
seems pretty warm in your area so its totally normal.
Make sure you point a fan at your motherboard if you play games/run cinebench because its getting pretty hot otherwise
 
#2,738 ·
HippoLOL said:
Tuned 6400MT/s 2133 104.5 eCLK with -3 CO.

View attachment 2685372
Click to expand...
No additional fmax? Curious, what your vcore was like under load in mt?

PBO enabled with no fmax was having my vcore max around 1.24 under load around 5.3-5.4 and package temp around 85c peak. PBO +200 would have vcore around 1.33 with cores at ~5.2 with no offsets; fmax settings without any eclk or negative/positive offsets seem to be doing some weird things with vcore.
 
Save
Reply Quote Rep+ Rep+
#2,739 ·
Kaliz said:
seems pretty warm in your area so its totally normal.
Make sure you point a fan at your motherboard if you play games/run cinebench because its getting pretty hot otherwise
Click to expand...
Yes it is and i find coming form AM4 to AM5 that AM5 has way more settings that i need to learn to try get optimal performance. So far on -20 and EXPO II with power gear down disabled. Most other lines are on Auto with iGPU disabled and spread Spectrum. ASPM, should that be disabled?

Last cr23 run was 23240 if i recall hitting 75 deg as Ambient is prob around 26-28 deg in the room.
 
#2,740 · (Edited)
So i'm back from work and have had some time to test ASUS's new "Core Tunings Config for Gaming" feature
Results are a little of a mixed bag

I flashed from bios 2505 @ agesa 1.2.02A to bios 2604 @ agesa 1.2.02B and configured my known to be fully stable 8200/2233 memory-profile

Some general observations:
  • "Core Tunings Config for Gaming" AUTO = legacy mode edit Getting different feedback from ppl reporting auto = level 1/2 for them, dont know why its different
  • Aida is getting less read and higher copy, while write stays the same, compared to agesa 1.2.02A

AIDA64 latency results:
  • AUTO (legacy) = getting the best latency in aida as expected
  • Level 1 = same aida latency as 1.2.02A
  • Level 2 = same aida latency as "level 1"

Clams cache/memory benchnark:
  • AUTO (legacy) = scoring the same as older agesa 1.2.0.0
  • Level 1 = scoring the same as older agesa 1.2.0.0
  • Level 2 = = scoring the same as agesa 1.2.0.0A (highest numbers)

Karhu mb/s:
  • AUTO (legacy) = getting the least mb/s
  • Level 1 = setting a new high, have never seen upwards 256mb/s max numbers in only 3 min runtime
  • Level 2 = the same as agesa 1.2.0.0A

So each of these different settings have their own strong suit.. And we are back to ppl have to test their specific game/benchmark to decide whats best for them in their application -> there are no universal answer for "best settings"

Core Tunings Config for Gaming = AUTO (legacy)
Product Azure Font Screenshot Rectangle


Core Tunings Config for Gaming = Level 1
Azure Font Screenshot Computer Software



Core Tunings Config for Gaming = Level2
Product Azure Font Computer Screenshot
 
2,721 - 2,740 of 9,494 Posts
About this Discussion
9.5K Replies
519 Participants
Last post:
Tatili
Overclock.net
posts
28M
members
562K
Since
2004
The premier forum for overclocking experts and enthusiasts. Discuss hardware optimization, custom builds, benchmarking, cooling solutions, and pushing the boundaries of computing performance. From beginner guides to extreme overclocking, join our technical community to master system tuning.
Full Forum Listing
Explore Our Forums
Intel CPUs Hardware News NVIDIA PC Gaming Water Cooling