[Mark12]

First of all Hello to everyone

)

So i having trouble with z68,my setup is I5 3570 , 8gigs ram(corsair 1333) ,and HD4850 graphic card(HD 7950 coming for few days)
So i installed everything and i pressed On button,after that i saw error 19 for 1 sec and after that error 55(whole time) with 4 beeps,no picture at all.so i check manual and it says ''No memory installed'',and i tried everything-from removing battery,to changing ram from one slot to another... and NO HELP.

Anyone had same problem,should i just return it to shop or can i solve this issue???

 

[Xinoxide]

is the extreme3 bios up to date to support ivy bridge?

 

[Mark12]

Quote:

Originally Posted by Xinoxide

is the extreme3 bios up to date to support ivy bridge?

hmm,i don't know,what i need for update??
i found bios chip on board and some small sticky paper is on chip.
something is written on paper

Z68 EXT
REME3
GEN3
P1,30-15A

is it maybe version 1,30 then???

 

[Xinoxide]

possibly, did you check to see if your hardware is compatible before purchasing?

Since you purchased from a shop, did someone tell you it would work?

edit:

1.3 is not Ivy bridge compatible, that is what the 1.3 means ont he chip.

Ivy was not supported until bios revision 2.1.

http://www.asrock.com/mb/overview.us.asp?cat=CPU&Model=Z68%20Extreme3%20Gen3

 

[Mark12]

so i need to go back to shop to ask them can they update to 2,10?
or find a friend with cpu 1,30 version and update,and then will work?

 

[Xinoxide]

Yeah.