Your CPU could be quite weak...specs?

 

not really I have an AMD FX 6300 and a AMD Radeon R9 200 Series
it worked perfectly fine before but now its unbearable
i had the g502 for nearly a year now

 

Was your last mouse 1000hz?

 

Check to make sure you're not running it in a USB 3.0 port. There are some USB 2.0/3.0 bridge issues that can cause what you describe, whereas running the mouse in USB 2.0 native mode might give better results. If you're already in a USB 2.0 jack, I can't help ya.

For what it's worth, I can't tell the difference between 125 Hz and 250 Hz polling rate, I know I couldn't tell with 500+ Hz. But, I also don't yank my mouse around like a rabid ape either. =)

Greg

 

it was some weird sharkoon gaming mouse that i got for free so probably not
i used the g502 on 1000hz without any problems for a year as i said before but dunno why its acting up now

 

Quote:

Originally Posted by hammong

Check to make sure you're not running it in a USB 3.0 port. There are some USB 2.0/3.0 bridge issues that can cause what you describe, whereas running the mouse in USB 2.0 native mode might give better results. If you're already in a USB 2.0 jack, I can't help ya.

For what it's worth, I can't tell the difference between 125 Hz and 250 Hz polling rate, I know I couldn't tell with 500+ Hz. But, I also don't yank my mouse around like a rabid ape either. =)

Greg

had it plugged in a usb 2.0 already, just now i tried to plug it in a usb 3.0 but it made no difference

 

Hey I am having a similar problem, I know this forum is 9 years old but I was wondering if you found a solution?

 

Dunno, but I'd guess a new mouse solved the issue and that's why this thread was in the crypt.