[Anhphe93]

Simply find a combination of them to eliminate the problem in overclocking, Which will probably be more stable. You just don't go over the limit that people usually talk about it. They depend on the chip of ram you use, so find a setting that is stable for you.

 

[Anhphe93]

Yeah that's what I'm trying, but what does it do? From what I've read lower values better signals but less voltage, high values crap signal but more voltage, is it right?

High ProcODT can help reduce the Dram Voltage a bit while maintaining stability.
CAD-BUS you'll need to keep an eye on it during overclocking to find a setting that's bug-free. if you use two single rank then just set Off-Off-RZQ/5

 

[Anhphe93]

Gonna try, tnx for sharing. I just want to push it to its limits coz I know it can go further, I'm just trash at setting stuff lol


Understood, my ProcODT range is from 43.(x) to 60, lower or higher = no boot, so should I leave this setting in a middle ground then tweak it once I find a stable OC?
Also, I have a 2x8gb 3600-15-15-15 B-Die Kit from G.Skill, from my understanding it should be single rank, can I check it with Thaiphoon?

Single rank means ram has one side chip(8gb)

 

[Anhphe93]

Testing right now, 3600 is giving me an error on 12 (Anta Extreme) gonna play with voltages and see how it goes, 3533 instead is erroring on 4, prob related to CAD_BUS I guess? not sure

Take a picture on zen timing, that way it will be easier for people to give you advice

 

[Anhphe93]

I'm currently 19 min in anta without errors, this is the first time I was able to pass 2 mins with 3600 lol
tRFC is auto right now, the other setting are the ones I use with my daily 3466 oc.
View attachment 2573666

Don't rush to play with SCL. Low SCL is not necessarily good, too low may not be stable, sometimes 4-4 or 5-5 will give much better results. Let's focus on TRFC and put SCL aside.
With 2 sticks ram single rank, I suggest a test CAD level for you is 24-24-24-24 or 40-20-24-24.
This is my experience when overclocking with 2 sticks ram single rank and giving stable results.