[mcmanus9442]

Joined the 50k club with my new loop
View attachment 2718783

HOLY 35 TRP @ 8000. What voltage are these at? I assume 1.65-1.68ish?

 

[Donquidik]

HOLY 35 TRP @ 8000. What voltage are these at? I assume 1.65-1.68ish?

It's just 1.6v and that's probably too much,I think it would be fine at 1.57 but temps aren't an issue so I haven't bothered seeing how low it will go.

 

[mcmanus9442]

It's just 1.6v and that's probably too much,I think it would be fine at 1.57 but temps aren't an issue so I haven't bothered seeing how low it will go.

Very strong kit to do that trp with such low voltages

 

[Donquidik]

Very strong kit to do that trp with such low voltages

I think it is actually one of the worse CL26 1.4v 6000 kits from G. Skill

 

[Kaliz]

trying cudimm on 9600X its really easy on the IMC so CPU could run 5725MHz!

kaliz`s 47 sec 176 ms score: y-cruncher - Pi-2.5b with aRyzen 5 9600X

The Ryzen 5 9600X @ 5725.1MHzscores getScoreFormatted in the y-cruncher - Pi-2.5b benchmark. kalizranks #17 worldwide and #16 in the hardware class. Find out more at HWBOT.

hwbot.org

 

[Kaliz]

and with this CUDIMM kit i also could boot 8800/2200 with 9700X... wow!! DDR5-8700 runs almost, 8600 fully stable in YC.

 

[Donquidik]

and with this CUDIMM kit i also could boot 8800/2200 with 9700X... wow!! DDR5-8700 runs almost, 8600 fully stable in YC.

Very nice, I can boot up to 8700 but I cannot get 8600 stable. 8500 I cannot do very easily either, so I am stuck with 8400 GDM on maximum. I ended up dailying 8000 with really tight timings instead.

 

[Zero989]

Very nice, I can boot up to 8700 but I cannot get 8600 stable. 8500 I cannot do very easily either, so I am stuck with 8400 GDM on maximum. I ended up dailying 8000 with really tight timings instead.

This is so funny because I am in the same situation.

$2000 on RAM kits
$2000+ on motherboards

All to circle back to what a $99 motherboard can do with a $130 kit of ram.

 

[fbsrkc06]

and with this CUDIMM kit i also could boot 8800/2200 with 9700X... wow!! DDR5-8700 runs almost, 8600 fully stable in YC.

nice so good

 

[Donquidik]

This is so funny because I am in the same situation.

$2000 on RAM kits
$2000+ on motherboards

All to circle back to what a $99 motherboard can do with a $130 kit of ram.

I just went ahead and bought the Apex, but I'm on the 5th CPU. Keep itching to find a good 9950X3D but can't really justify the additional cost for 3D v-cache which does.. precisely nothing for me.

 

[Kaliz]

with the normal kit

 

[Kaliz]

View attachment 2722859

and i ran some 6600C24 for the Teamcup on hwbot: kaliz`s 2 min 25 sec 442 ms score: PYPrime - 32b with BenchMate with aDDR5 SDRAM

 

[domdtxdissar]

and i ran some 6600C24 for the Teamcup on hwbot: kaliz`s 2 min 25 sec 442 ms score: PYPrime - 32b with BenchMate with aDDR5 SDRAM

Like i said on the ZT discord, very nice clockspeed controll on your pyprime run
Only 0.57mhz below the limit

 

[Kaliz]

Like i said on the ZT discord, very nice clockspeed controll on your pyprime run
Only 0.57mhz below the limit

i had a couple more scores, but with bclk OC , Benchmate is reporting too high clocks. Had a 1:25:121 but it was 5007 MHz Next up is the 9800X3D , i supposse it 20 seconds faster? i remember pyprime 2b being under 7seconds?

 

[domdtxdissar]

i had a couple more scores, but with bclk OC , Benchmate is reporting too high clocks. Had a 1:25:121 but it was 5007 MHz Next up is the 9800X3D , i supposse it 20 seconds faster? i remember pyprime 2b being under 7seconds?

Looking forward to seeing your results, but dont get your hopes too high, 32B dont really benefit much from v-cache, only the 2B bench does

 

[Kaliz]

 

[damric]

View attachment 2723662


View attachment 2723661

Have you noticed that the CPU actually runs cooler with the 8000+ RAM?

 

[Donquidik]

Have you noticed that the CPU actually runs cooler with the 8000+ RAM?

Mine does not run any cooler with 8000+ speeds vs 6400 / 6600 with high VSOC

However, mine is delidded so maybe that is another variable.

 

[Kaliz]

Have you noticed that the CPU actually runs cooler with the 8000+ RAM?

havent really noticed to be fair as i never took a comparison, it might be that the higher soc voltage for 1:1 is causing it!

 

[Zero989]

Mine does not run any cooler with 8000+ speeds vs 6400 / 6600 with high VSOC

However, mine is delidded so maybe that is another variable.
View attachment 2723717
View attachment 2723716

I'd think there would be a diff between single ccd and dual.

On Intel 11900k, the power consumption did go up with gear 1 over 2.

Perhaps check the package power and not necessarily the temperatures.