i experience weird problems i know i shouldn't for such an expensive machine

The more specific you are the easier it will be to troubleshoot and identify what the issue could be. What specific problems are you having? Are you running stock settings?
Is your memory set to XMP profile?
What is your Vcore and LLC?

 

Good point, so i am running PBO and a +4LLC. Currently im not using DOCP, but it applies whether its on or i do manual settings. (from Ryzen calculator or Asus mem profiles) In games the problems i experience seem to be the CPU can't keep up with GPU (3080) Its like the draw calls are being slower than GPU, so things will pop in, small like the grass will kind of shift. Aiming down iron sights in some games will cause extreme hitch every time i right click (ADS). Games requiring high transfer rate will cause a really choppy experience when panning left/right, like Halo infiinite for example. Most games get choppy when in lobby or loading area. Like when the characters walk around in ModernWarfare, or how they do the animation right before the match starts. Its not a whole lot, but enough to where i know its not normal. When doing memory benchmarks in Linpack extreme the results aren't stable. I wont get errors though. Moving around some windows can be really choppy/stuttering like EA desktop. When extracting large files the speed will drop to like 25 MB/s and swing up to 100's of MB/s. Aida benchmark shows L2 copy rate will be anywhere from 100-200gbs less than read and copy. Icon's will load in slowly. (even getting rid of temp icon files) but this will vary depending on CPU voltages. I've replaced all the parts in my PC and all these problems persist. And i mean everything, motherboard to PSU to memory to CPU to storage to GPU and so on. Thanks for your help. I can do a print out of bios settings if it helps. But even on auto settings these problems apply, some settings help slightly some hurt slightly, but never get the experience id expect from such an expensive machine. These problems happen whether or not memory temps are 34C- 50C. (max temps hit 51C at times) Thanks for the help!

 

As the comment above mentioned. First let's start with what weird problems you have been experiencing, list all your issues you've had or can remember.

 

First: Check Dimm temp on load with hwinfo. If the memory is over 50c after 1 hour full load, then you want to cool the memory with an direct fan over the dimms

 

It has happened across BIOS revisions unfortunately. I am running the latest stable BIOS right now.

 

X570 dark hero?
If so, 2x16 ram b-die is more ideal. As it's a daisy chain memory layout. Did you test with just 2 memory sticks in the proper Ram slot?

 

Yes, on the x570 Dark hero. I have tried with just two sticks and also different kit in a 2 stick configuration. And they were in the proper slots, as per that manual. Its maddening lol.

 

Is your PBO stable? Have you run corecycler on it? You'll probably get better performance with LLC on auto. After that do your mem OC and you should be performing good.

 

I have run it before and it was fine. I have the same problem even without PBO on and same with an auto LLC. The problem persists regardless of what i do, just to varying degrees. I can get it sooo close to how i think it should perform but, these weird problems is what remains. (some of the problems are less so depending on which way i go, but never gone). =/

 

What settings have you set in bios ? What are your memory timings ?

 

I have gone from all auto to bios settings/stock. Same with DOCP on. Same with manual timings, regardless of what they are it happens. I can get a print out of bios and post if that helps though.

 

@Jdogdarkness

You've tried the presets between 3200-3600Mhz right? If so, you would need a fan over the ram for active cooling.

Also, you didn't disable any c-states did you? With AMD you keep them enabled at default.

Another thing...I would like to see your bios settings. A phone video at 1080p should do. I don't know if you messed with PPT, TDC and EDC or tried to tweak PBo, etc. All of which under utilizes the Dark Hero. Have you figured out how to use Dynamic OC? That is what separates the Dark Hero from the other Asus x570's.

 

I have tried a bunch of different configs as far as memory profiles from asus and using DRAM calculator. I've also tried a bunch of stuff With DF-cstates on and off and all that. I've done no undervolt per core and even adding voltage per core I've spent more time troubleshooting this computer than i have playing games sadly. Here is one i've been playing with today, its the text file from bios. And i do know how to use dynamic OC. Its very cool, i want to set it up permanently, once i get this ironed out. I have managed to get over 16K in Timespy cpu test with dynamic OC.


[2022/07/29 22:33:06]
Ai Overclock Tuner [Auto]
Memory Frequency [DDR4-3733MHz]
FCLK Frequency [1866MHz]
Core Performance Boost [Auto]
CPU Core Ratio [Auto]
Core VID [Auto]
CCX0 Ratio [Auto]
CCX0 Ratio [Auto]
Dynamic OC Switcher [Auto]
TPU [Keep Current Settings]
Performance Bias [Auto]
PBO Fmax Enhancer [Enabled]
Precision Boost Overdrive [Manual]
PPT Limit [350]
TDC Limit [300]
EDC Limit [300]
Precision Boost Overdrive Scalar [Auto]
Curve Optimizer [Per Core]
Core 0 Curve Optimizer Sign [Negative]
Core 0 Curve Optimizer Magnitude [20]
Core 1 Curve Optimizer Sign [Negative]
Core 1 Curve Optimizer Magnitude [20]
Core 2 Curve Optimizer Sign [Negative]
Core 2 Curve Optimizer Magnitude [20]
Core 3 Curve Optimizer Sign [Negative]
Core 3 Curve Optimizer Magnitude [20]
Core 4 Curve Optimizer Sign [Negative]
Core 4 Curve Optimizer Magnitude [20]
Core 5 Curve Optimizer Sign [Negative]
Core 5 Curve Optimizer Magnitude [20]
Core 6 Curve Optimizer Sign [Negative]
Core 6 Curve Optimizer Magnitude [15]
Core 7 Curve Optimizer Sign [Negative]
Core 7 Curve Optimizer Magnitude [15]
Core 8 Curve Optimizer Sign [Negative]
Core 8 Curve Optimizer Magnitude [15]
Core 9 Curve Optimizer Sign [Negative]
Core 9 Curve Optimizer Magnitude [15]
Core 10 Curve Optimizer Sign [Negative]
Core 10 Curve Optimizer Magnitude [15]
Core 11 Curve Optimizer Sign [Negative]
Core 11 Curve Optimizer Magnitude [15]
Max CPU Boost Clock Override [200]
Platform Thermal Throttle Limit [Manual]
Platform Thermal Throttle Limit [95]
DRAM CAS# Latency [14]
Trcdrd [14]
Trcdwr [14]
DRAM RAS# PRE Time [14]
DRAM RAS# ACT Time [28]
Trc [42]
TrrdS [4]
TrrdL [4]
Tfaw [16]
TwtrS [4]
TwtrL [8]
Twr [10]
Trcpage [Auto]
TrdrdScl [4]
TwrwrScl [4]
Trfc [320]
Trfc2 [320]
Trfc4 [320]
Tcwl [12]
Trtp [6]
Trdwr [10]
Twrrd [2]
TwrwrSc [1]
TwrwrSd [6]
TwrwrDd [6]
TrdrdSc [1]
TrdrdSd [4]
TrdrdDd [4]
Tcke [1]
ProcODT [40 ohm]
Cmd2T [1T]
Gear Down Mode [Auto]
Power Down Enable [Disabled]
RttNom [Auto]
RttWr [Auto]
RttPark [Auto]
MemAddrCmdSetup [Auto]
MemCsOdtSetup [Auto]
MemCkeSetup [Auto]
MemCadBusClkDrvStren [24.0 Ohm]
MemCadBusAddrCmdDrvStren [24.0 Ohm]
MemCadBusCsOdtDrvStren [24.0 Ohm]
MemCadBusCkeDrvStren [24.0 Ohm]
Mem Over Clock Fail Count [Auto]
Voltage Monitor [Die Sense]
CPU Load-line Calibration [Level 3]
CPU Current Capability [140%]
CPU VRM Switching Frequency [Auto]
VRM Spread Spectrum [Disabled]
Active Frequency Mode [Disabled]
CPU Power Duty Control [Extreme]
CPU Power Phase Control [Extreme]
CPU Power Thermal Control [120]
VDDSOC Load-line Calibration [Level 1]
VDDSOC Switching Frequency [Auto]
VDDSOC Phase Control [Extreme]
DRAM Current Capability [130%]
DRAM Power Phase Control [Extreme]
DRAM Switching Frequency [Auto]
CPU Core Current Telemetry [Auto]
CPU SOC Current Telemetry [Auto]
Force OC Mode Disable [Disabled]
SB Clock Spread Spectrum [Disabled]
VTTDDR Voltage [0.73750]
VPP_MEM Voltage [Auto]
DRAM CTRL REF Voltage on CHA [Auto]
DRAM CTRL REF Voltage on CHB [Auto]
VDDP Voltage [0.90000]
1.8V Standby Voltage [1.80000]
CPU 3.3v AUX [Auto]
1.2V SB Voltage [Auto]
DRAM R1 Tune [Auto]
DRAM R2 Tune [Auto]
DRAM R3 Tune [Auto]
DRAM R4 Tune [Auto]
PCIE Tune R1 [Auto]
PCIE Tune R2 [Auto]
PCIE Tune R3 [Auto]
PLL Tune R1 [Auto]
PLL reference voltage [Auto]
T Offset [Auto]
Sense MI Skew [Auto]
Sense MI Offset [Auto]
Promontory presence [Auto]
Clock Amplitude [Auto]
CPU Core Voltage [Auto]
CPU SOC Voltage [Manual]
- VDDSOC Voltage Override [1.15000]
DRAM Voltage [1.47500]
VDDG CCD Voltage Control [1.000]
VDDG IOD Voltage Control [1.050]
CLDO VDDP Voltage [0.900]
1.00V SB Voltage [Auto]
1.8V PLL Voltage [1.80000]
Security Device Support [Enable]
SHA-1 PCR Bank [Disabled]
SHA256 PCR Bank [Enabled]
Pending operation [None]
Platform Hierarchy [Enabled]
Storage Hierarchy [Enabled]
Endorsement Hierarchy [Enabled]
TPM 2.0 UEFI Spec Version [TCG_2]
Physical Presence Spec Version [1.3]
Disable Block Sid [Disabled]
Selects TPM device [Enable Firmware TPM]
Erase fTPM NV for factory reset [Enabled]
PSS Support [Enabled]
PPC Adjustment [PState 0]
NX Mode [Enabled]
SVM Mode [Disabled]
SMT Mode [Auto]
Core Leveling Mode [Automatic mode]
CCD Control [Auto]
SATA Port Enable [Enabled]
SATA Mode [RAID]
NVMe RAID mode [Disabled]
SMART Self Test [Auto]
HD Audio Controller [Enabled]
PCIEX16_1 Bandwidth Bifurcation configuration [Auto Mode]
PCIEX16_2 Bandwidth Bifurcation configuration [Auto Mode]
When system is in working state [All On]
Q-Code LED Function [Auto]
When system is in sleep, hibernate or soft off states [Aura Only]
Realtek 2.5G LAN Controller [Auto]
Intel LAN Controller [Setup]
ASM1074 Controller [Enabled]
Wi-Fi 6 (802.11ax) Controller [Enabled]
Bluetooth Controller [Enabled]
USB power delivery in Soft Off state (S5) [Enabled]
PCIEX16_1 Mode [GEN 4]
PCIEX16_2 Mode [Auto]
PCIEX1 Mode [Auto]
PCIEX16_3 Mode [Auto]
M.2_1 Link Mode [GEN 4]
M.2_2 Link Mode [Auto]
SB Link Mode [Auto]
ErP Ready [Disabled]
Restore AC Power Loss [Power Off]
Power On By PCI-E [Disabled]
Power On By RTC [Disabled]
Above 4G Decoding [Enabled]
Resize BAR Support [Auto]
SR-IOV Support [Disabled]
Legacy USB Support [Enabled]
XHCI Hand-off [Enabled]
SanDisk Cruzer 8.02 [Auto]
USB Device Enable [Enabled]
U32G2_2 [Enabled]
U32G2_3 [Enabled]
U32G2_4 [Enabled]
U32G1_10 [Enabled]
U32G1_11 [Enabled]
USB12 [Enabled]
USB13 [Enabled]
U32G2_7 [Enabled]
U32G2_C9 [Enabled]
Network Stack [Disabled]
Device [SATA6G_5: ST2000LM015-2E8174]
CPU Temperature [Monitor]
CPU Package Temperature [Monitor]
MotherBoard Temperature [Monitor]
VRM Temperature [Monitor]
T_Sensor Temperature [Monitor]
Water In T Sensor Temperature [Monitor]
Water Out T Sensor Temperature [Monitor]
CPU Fan Speed [Monitor]
CPU Optional Fan Speed [Monitor]
Chassis Fan 1 Speed [Monitor]
Chassis Fan 2 Speed [Monitor]
Chassis Fan 3 Speed [Monitor]
High Amp Fan Speed [Monitor]
W_PUMP+ Speed [Monitor]
AIO PUMP Speed [Monitor]
Flow Rate [Monitor]
CPU Core Voltage [Monitor]
3.3V Voltage [Monitor]
5V Voltage [Monitor]
12V Voltage [Monitor]
CPU Fan Q-Fan Control [Auto]
CPU Fan Step Up [0 sec]
CPU Fan Step Down [0 sec]
CPU Fan Speed Low Limit [200 RPM]
CPU Fan Profile [Standard]
Chassis Fan 1 Q-Fan Control [Auto]
Chassis Fan 1 Q-Fan Source [CPU]
Chassis Fan 1 Step Up [0 sec]
Chassis Fan 1 Step Down [0 sec]
Chassis Fan 1 Speed Low Limit [200 RPM]
Chassis Fan 1 Profile [Standard]
Chassis Fan 2 Q-Fan Control [Auto]
Chassis Fan 2 Q-Fan Source [CPU]
Chassis Fan 2 Step Up [0 sec]
Chassis Fan 2 Step Down [0 sec]
Chassis Fan 2 Speed Low Limit [200 RPM]
Chassis Fan 2 Profile [Standard]
Chassis Fan 3 Q-Fan Control [Auto]
Chassis Fan 3 Q-Fan Source [CPU]
Chassis Fan 3 Step Up [0 sec]
Chassis Fan 3 Step Down [0 sec]
Chassis Fan 3 Speed Low Limit [200 RPM]
Chassis Fan 3 Profile [Standard]
High Amp Fan Q-Fan Control [Auto]
High Amp Fan Q-Fan Source [CPU]
High Amp Fan Step Up [0 sec]
High Amp Fan Step Down [0 sec]
High Amp Fan Speed Low Limit [200 RPM]
High Amp Fan Profile [Standard]
Water Pump+ Q-Fan Control [Disabled]
AIO Pump Q-Fan Control [Disabled]
Above 4GB MMIO Limit [39bit (512GB)]
Fast Boot [Enabled]
Next Boot after AC Power Loss [Fast Boot]
Boot Logo Display [Auto]
Bootup NumLock State [On]
POST Delay Time [1 sec]
Wait For 'F1' If Error [Enabled]
Option ROM Messages [Force BIOS]
Interrupt 19 Capture [Disabled]
Setup Mode [Advanced Mode]
Launch CSM [Disabled]
OS Type [Windows UEFI mode]
AMI Native NVMe Driver Support [Enabled]
Flexkey [Reset]
Setup Animator [Disabled]
Load from Profile [1]
Profile Name [3733 twitterco]
Save to Profile [1]
DIMM Slot Number [DIMM_A1]
Bus Interface [PCIEX16_1]
Download & Install ARMOURY CRATE app [Disabled]
CPU Frequency [0]
CPU Voltage [0]
CCD Control [Auto]
Core control [Auto]
SMT Control [Auto]
Overclock [Enabled ]
Memory Clock Speed [Auto]
Tcl [Auto]
Trcdrd [Auto]
Trcdwr [Auto]
Trp [Auto]
Tras [Auto]
Trc Ctrl [Auto]
TrrdS [Auto]
TrrdL [Auto]
Tfaw Ctrl [Auto]
TwtrS [Auto]
TwtrL [Auto]
Twr Ctrl [Auto]
Trcpage Ctrl [Auto]
TrdrdScL Ctrl [Auto]
TwrwrScL Ctrl [Auto]
Trfc Ctrl [Auto]
Trfc2 Ctrl [Auto]
Trfc4 Ctrl [Auto]
Tcwl [Auto]
Trtp [Auto]
Tcke [Auto]
Trdwr [Auto]
Twrrd [Auto]
TwrwrSc [Auto]
TwrwrSd [Auto]
TwrwrDd [Auto]
TrdrdSc [Auto]
TrdrdSd [Auto]
TrdrdDd [Auto]
ProcODT [Auto]
Power Down Enable [Auto]
Cmd2T [Auto]
Gear Down Mode [Auto]
CAD Bus Timing User Controls [Auto]
CAD Bus Drive Strength User Controls [Auto]
Data Bus Configuration User Controls [Auto]
Infinity Fabric Frequency and Dividers [Auto]
ECO Mode [Disable]
Precision Boost Overdrive [Auto]
LN2 Mode [Auto]
SoC/Uncore OC Mode [Disabled]
VDDP Voltage Control [Auto]
VDDG Voltage Control [Auto]
NUMA nodes per socket [Auto]
LCLK Frequency Control [Auto]
LCLK DPM [Auto]
LCLK DPM Enhanced PCIe Detection [Auto]
Custom Pstate0 [Auto]
L1 Stream HW Prefetcher [Auto]
L2 Stream HW Prefetcher [Auto]
Core Watchdog Timer Enable [Auto]
Core Performance Boost [Auto]
Global C-state Control [Disabled]
Power Supply Idle Control [Auto]
SEV ASID Count [Auto]
SEV-ES ASID Space Limit Control [Auto]
Streaming Stores Control [Auto]
Local APIC Mode [Auto]
ACPI _CST C1 Declaration [Auto]
MCA error thresh enable [Auto]
PPIN Opt-in [Auto]
Fast Short REP MOVSB [Enabled]
Enhanced REP MOVSB/STOSB [Enabled]
IBS hardware workaround [Auto]
DRAM scrub time [Auto]
Poison scrubber control [Auto]
Redirect scrubber control [Auto]
Redirect scrubber limit [Auto]
NUMA nodes per socket [Auto]
Memory interleaving [Auto]
Memory interleaving size [Auto]
1TB remap [Auto]
DRAM map inversion [Auto]
ACPI SRAT L3 Cache As NUMA Domain [Auto]
ACPI SLIT Distance Control [Auto]
ACPI SLIT remote relative distance [Auto]
GMI encryption control [Auto]
xGMI encryption control [Auto]
CAKE CRC perf bounds Control [Auto]
4-link xGMI max speed [Auto]
3-link xGMI max speed [Auto]
xGMI TXEQ Mode [Auto]
PcsCG control [Auto]
Disable DF to external downstream IP SyncFloodPropagation [Auto]
Disable DF sync flood propagation [Auto]
CC6 memory region encryption [Auto]
Memory Clear [Auto]
Overclock [Enabled]
Memory Clock Speed [Auto]
Tcl [Auto]
Trcdrd [Auto]
Trcdwr [Auto]
Trp [Auto]
Tras [Auto]
Trc Ctrl [Auto]
TrrdS [Auto]
TrrdL [Auto]
Tfaw Ctrl [Auto]
TwtrS [Auto]
TwtrL [Auto]
Twr Ctrl [Auto]
Trcpage Ctrl [Auto]
TrdrdScL Ctrl [Auto]
TwrwrScL Ctrl [Auto]
Trfc Ctrl [Auto]
Trfc2 Ctrl [Auto]
Trfc4 Ctrl [Auto]
Tcwl [Auto]
Trtp [Auto]
Tcke [Auto]
Trdwr [Auto]
Twrrd [Auto]
TwrwrSc [Auto]
TwrwrSd [Auto]
TwrwrDd [Auto]
TrdrdSc [Auto]
TrdrdSd [Auto]
TrdrdDd [Auto]
ProcODT [Auto]
Power Down Enable [Auto]
Disable Burst/Postponed Refresh [Auto]
DRAM Maximum Activate Count [Auto]
Cmd2T [Auto]
Gear Down Mode [Auto]
CAD Bus Timing User Controls [Auto]
CAD Bus Drive Strength User Controls [Auto]
Data Bus Configuration User Controls [Auto]
Data Poisoning [Auto]
DRAM Post Package Repair [Default]
RCD Parity [Auto]
DRAM Address Command Parity Retry [Auto]
Write CRC Enable [Auto]
DRAM Write CRC Enable and Retry Limit [Auto]
Disable Memory Error Injection [True]
DRAM ECC Symbol Size [Auto]
DRAM ECC Enable [Auto]
DRAM UECC Retry [Auto]
TSME [Auto]
Data Scramble [Auto]
DFE Read Training [Auto]
FFE Write Training [Auto]
PMU Pattern Bits Control [Auto]
MR6VrefDQ Control [Auto]
CPU Vref Training Seed Control [Auto]
Chipselect Interleaving [Auto]
BankGroupSwap [Auto]
BankGroupSwapAlt [Auto]
Address Hash Bank [Auto]
Address Hash CS [Auto]
Address Hash Rm [Auto]
SPD Read Optimization [Enabled]
MBIST Enable [Disabled]
Pattern Select [PRBS]
Pattern Length(VMR) [6]
Aggressor Channel [1 Aggressor Channel]
Aggressor Static Lane Control [Disabled]
Target Static Lane Control [Disabled]
Worst Case Margin Granularity [Per Chip Select]
Read Voltage Sweep Step Size [1]
Read Timing Sweep Step Size [1]
Write Voltage Sweep Step Size [1]
Write Timing Sweep Step Size [1]
IOMMU [Auto]
RTM Margining Support [Auto]
Precision Boost Overdrive [Auto]
Precision Boost Overdrive Scalar [Auto]
FCLK Frequency [Auto]
SOC OVERCLOCK VID [0]
UCLK DIV1 MODE [Auto]
VDDP Voltage Control [Auto]
VDDG Voltage Control [Auto]
SoC/Uncore OC Mode [Auto]
LN2 Mode [Auto]
ACS Enable [Auto]
PCIe ARI Support [Auto]
PCIe ARI Enumeration [Auto]
PCIe Ten Bit Tag Support [Auto]
cTDP Control [Auto]
EfficiencyModeEn [Auto]
Package Power Limit Control [Auto]
APBDIS [1]
DF Cstates [Disabled]
Fixed SOC Pstate [P0]
CPPC [Auto]
CPPC Preferred Cores [Auto]
NBIO DPM Control [Auto]
Early Link Speed [Auto]
Presence Detect Select mode [Auto]
Preferred IO [Auto]
CV test [Auto]
Loopback Mode [Auto]
SRIS [Auto]
Data Link Feature Exchange [Enabled ]

 

What is your boot drive?

 

I've got a sn850 1TB Gen 4 nvme ssd for boot.

 

Wow, I can clearly see why you are having problems. You are trying to use every CPU OC tweak in the bios all at the same time. You need to reset the entire bios to default.

Memory Frequency [DDR4-3733MHz]
FCLK Frequency [1866MHz]

Set the ram to 3600Mhz
Set the FCLK to 1800Mhz

Although it's not clear in the bios you have PBO 1 and PBO 2. PBO 2 is for this gen of Ryzen cpus. PBO 1 was for the older version. So PBO 1 should be disabled. Your curve optimizer settings don't look right. Are you saying you don't have at least 1 core that doesn't need a negative offset? And you don't have a best core?

Also, why are you using PBO Fmax Enhancer [Enabled] with curve optimizer? Again, you are using every cpu OC tweak in the bios. This should be disabled.

Max CPU Boost Clock Override [200]!!????? With that offset...WOW!!!!

PPT Limit [350]
TDC Limit [300]
EDC Limit [300]

Did you copy this from someone else?

Again, reset the bios to default and set the memory to 3600mhz. Assuming that the memory can do that at stock.

 

Wow, I can clearly see why you are having problems. You are trying to use every CPU OC tweak in the bios all at the same time. You need to reset the entire bios to default.

Set the ram to 3600Mhz
Set the FCLK to 1800Mhz

Although it's not clear in the bios you have PBO 1 and PBO 2. PBO 2 is for this gen of Ryzen cpus. PBO 1 was for the older version. So PBO 1 should be disabled. Your curve optimizer settings don't look right. Are you saying you don't have at least 1 core that doesn't need a negative offset? And you don't have a best core?

Also, why are you using PBO Fmax Enhancer [Enabled] with curve optimizer? Again, you are using every cpu OC tweak in the bios. This should be disabled.

Max CPU Boost Clock Override [200]!!????? With that offset...WOW!!!!

Did you copy this from someone else?

Again, reset the bios to default and set the memory to 3600mhz. Assuming that the memory can do that at stock.

I have tried without all this all, and it still persists. even with everything stock/auto. I was saying i have tried to use all on positive offset and negative offset, i've also gone by CCD and done some configs with just the cores that SEEMED they might benefit from a positive offset, and the rest negative. I basically used the methods from Skatterbencher and other overclockers. From what i've seen from skatterbencher and Gamers Nexus etc, PBO and PBO2 work in tandem to get the best of both worlds. I could be misunderstanding something though. Also, Ryzen Master will set the PBO2 to -30 on the cores and clock tuner does the automatic check and overclocking, and does the same thing. Ill try to reset to stock again, but i am pretty sure it will persist. Ill be back! Thanks for the help!

 

set your nvme to pcie 4.0 and not auto

 

Found the fix?

 

I would like the proper BIOS setting for a ROG 10 asus gaming computer running windows 11 operating system, it has a 1 TB samsung nvmd ssd drive and a 1 TB toshiba ssd drive. 16 GBs of samsung RAM with a octacore cpu. Am sure the reason of the Blue screen of death is due to incorrect BIOS settings. The first time it went into blue screen of death it stayed that way till the BIOS and the 512 GB Intel nvmd ssd drive was changed to the 1 TB samsung nvmd ssd drive. So please send me the correct BIOS settings for this ROG 10 computer that has windows 11 operating system.
Thanks

 

I have a Ryzen 5900x and some Samsung B-die 4x8 3600 cl14 ram. However, i experience weird problems i know i shouldn't for such an expensive machine. Been banging my head for years. I have the latest drivers etc. And i know a little more about hardware and overclocking than the average person. (When i say avg person, i dont mean avg overclocker lol) If you can give me some specific tips about things like, CPPC, CPPC preferred, C-states off/on type stuff it would be much appreciates. Even better, if you know any general rule of thumb tips about VDDP voltages vs cldo VDDP i could apply. I know Ryzen likes stepping of 40-50mv for CCD,cldo vddp, vsoc etc. Save me from bashing my head in lol Thanks folks!

Turned off Advanced" -> "Trusted Computing" tpm and fixed all weird stuttering