[Biscottoman]

I have just tried to move the ram to the other two slots, still q-code 94 still no boot still probably motherboard fault i guess

 

[MrHoof]

UPDATE: i've just tried reseating both nvme, mounted the GPU on the second pcie slot, tried a 780 ti insteaad of the 3090 and I'm still unable to boot (still stucked to q-code 94). So clearly not a gpu issue or something, dunno how to proceed now...

Try without the nvme´s could be one of them being faulty too. If you didnt try yet from reading sounds like you always had the OS one plugged in.

 

[Quasars]

As I told you, it may be the Pcie controller of the processor, the best is to check in a computer store to see if it comes from the CPU or the motherboard. Since you no longer have a choice, try updating the bios on the usb bios flashback port with the minimum (if you have another keyboard it will be better). Good Luck

 

[Biscottoman]

Try without the nvme´s could be one of them being faulty too. If you didnt try yet from reading sounds like you always had the OS one plugged in.

Already tried with no nvme mounted or just with the one without the os, still got the issue

 

[Biscottoman]

As I told you, it may be the Pcie controller of the processor, the best is to check in a computer store to see if it comes from the CPU or the motherboard. Since you no longer have a choice, try updating the bios on the usb bios flashback port with the minimum (if you have another keyboard it will be better). Good Luck

I don't think i have any way to test the CPU as you said, i will do some more tests during the weekend and then try to reflash another BIOS version as last resort (when i flashed the first time, it also has taken quite time to complete it; maybe it went wrong too). If i don't get any fix in these two days on monday i will contact the mobo seller to rma it hoping that the CPU Is fine. I don't think i have other choice

 

[Quasars]

When I go from EZ Flash bios it takes me about 5-10 minutes to flash the bios, UEFI bios are much more complete and more larger, more than 5 minutes is normal.
I hope for you that the CPU is ok.

 

[m1911torres]

Do you have a capture card or the m.2 expansion plugged into the other pcie? Im having the same issue and when i take my thunderbolt card it works fine but with it in i restart into bootloops at code 94. Im trying a bios update atm

 

[vincentmaddela]

Do you have a capture card or the m.2 expansion plugged into the other pcie? Im having the same issue and when i take my thunderbolt card it works fine but with it in i restart into bootloops at code 94. Im trying a bios update atm

Did this work? I'm having a similar issue. Changed the graphics card, so had to update psu hence all new cables still 94 pops on motherboard. Anyone found a solution to this?