"Introduction / Basic info"
Links:
TimeDrapery
Links:
141 - 160 of 322 Posts
Joined
·
130 Posts
for my 5600 only HOC take my load max 4750-4800 because hydra have control
only PBO my max load are 4450
Joined
·
102 Posts
Yes, 1.3c added Zen4 support. 1.3d made some changes to thermal limits in diagnostics and apparently works a bit better. I haven’t done a full diagnostic run on 1.3d yet.
Joined
·
102 Posts
With the PBO settings in my screenshot I can maintain 5420+ on CCD0 and 5360+ on CCD1 during a CB23. With my 24x7 settings in Bios (-22 all core, 185PPT limit, 95c thermal) It usually runs 5315/5150 or so. HOC has me topping out around 5200 sustained on CCD0 but I haven't really played a ton with it, been mostly focused on PBO.
Joined
·
130 Posts
bro !! hydra maybe it works completely differently in 5xxx cpu
Joined
·
130 Posts
Joined
·
242 Posts
I warned them ... 🤦♂️
Joined
·
242 Posts
[Official] HYDRA (and HYDRA PRO) Thread
"Introduction / Basic info" Links: Yuri Bubliy / 1usmus' Patreon | igor'sLAB | PROJECT HYDRA — OC Sandbox for ZEN3 CPUs | Freeware Download | | TechSpot | Downloads | Project Hydra 1.0.0.7 |
www.overclock.net
Did you download the latest version? I believe there were two 1.3D patreon posts, only a few bytes different in size, but the latest one worked for me
I think so, it was the only one I saw.Did you download the latest version? I believe there were two 1.3D patreon posts, only a few bytes different in size, but the latest one worked for me
If not, can you PM the link to me?
Sorry, I was wrong. That was an issue with 1.3C not D. Did you try to run it fresh? Extract 1.3C to a new folder, overwrite the exe with the D version, and run again?
EDIT: The weird thing was that I had that issue, but it was probably with C. Maybe you are using the old faulty C version as basis? If not, I have no idea
The 180,170 kb version of C is what I started with and then extracted the D exe into it. Fresh folder.Sorry, I was wrong. That was an issue with 1.3C not D. Did you try to run it fresh? Extract 1.3C to a new folder, overwrite the exe with the D version, and run again?
EDIT: The weird thing was that I had that issue, but it was probably with C. Maybe you are using the old faulty C version as basis? If not, I have no idea
View attachment 2606591
Joined
·
851 Posts
Mann1x, can you please post your suggested Hydra diagnostic settings that you posted months ago on the 5950x Hydra Discord channel? The numbers related to this. Thanks a lot.
![Font Electronic device Screenshot Electric blue Number]()
Joined
·
43 Posts
Why don`t you select his preset? Its included since 1.3C - or do you talk about different settings?
Joined
·
2 Posts
Hi All, hope someone can help.
Recently put together a 5900X system in a custom loop and wanted to try undervolting to keep temps under idle down a bit.
Before finding Hydra I simply tried adding values in the bios of CO as -30 -25 or -20 and windows would crash with a WHEA blue screen. Someone suggested changing load line limit from auto to level 3...
anyway found Hydra and ran a diagnostics on basic settings just to find the best OC values and after a few hours it cam back saying -30 on all cores which as you can probably tell crashed the system.
I assume any core in Hydra with an * next to it means a good core?
So next, in Hydra I tried just manually setting each CO value on each core leaving what I assume are the good cores at -5 and the rest at -20.. computer seems fine (although not sure how to tell if those settings are applied) but what I have noticed in the TEL/VID/Vdroop details my CPU still seems to be drawing up to 1.4 volts even on idle which seems high and normal level if I leave the bios and HYdra alone
what could i possibly be doing wrong? and why could Hydra be saying -30 is fine on all cores when its quite clear its not.
I just started of another diag so will see what that comes back with. Was going to compare with Ryzen master but that I can even get installed.
Recently put together a 5900X system in a custom loop and wanted to try undervolting to keep temps under idle down a bit.
Before finding Hydra I simply tried adding values in the bios of CO as -30 -25 or -20 and windows would crash with a WHEA blue screen. Someone suggested changing load line limit from auto to level 3...
anyway found Hydra and ran a diagnostics on basic settings just to find the best OC values and after a few hours it cam back saying -30 on all cores which as you can probably tell crashed the system.
I assume any core in Hydra with an * next to it means a good core?
So next, in Hydra I tried just manually setting each CO value on each core leaving what I assume are the good cores at -5 and the rest at -20.. computer seems fine (although not sure how to tell if those settings are applied) but what I have noticed in the TEL/VID/Vdroop details my CPU still seems to be drawing up to 1.4 volts even on idle which seems high and normal level if I leave the bios and HYdra alone
what could i possibly be doing wrong? and why could Hydra be saying -30 is fine on all cores when its quite clear its not.
I just started of another diag so will see what that comes back with. Was going to compare with Ryzen master but that I can even get installed.
Joined
·
2 Posts
I have an asus x570 Gaming -F and i put medium just because I had no idea what to put
Hello
Can I also get a link, please?
141 - 160 of 322 Posts
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
