Overclock.net banner
13,681 - 13,697 of 13,697 Posts
I run locked multiplier of 44.25 since I only run BOINC all-core loads.

DRAM CAS# Latency [14]
DRAM RAS# to CAS# Read Delay [15]
DRAM RAS# to CAS# Write Delay [14]
DRAM RAS# PRE Time [14]
DRAM RAS# ACT Time [28]
Trc [42]
TrrdS [4]
TrrdL [6]
Tfaw [16]
TwtrS [4]
TwtrL [12]
Twr [12]
Trcpage [Auto]
TrdrdScl [4]
TwrwrScl [4]
Trfc [288]
Trfc2 [214]
Trfc4 [132]
Tcwl [14]
Trtp [8]
Trdwr [8]
Twrrd [4]
TwrwrSc [1]
TwrwrSd [6]
TwrwrDd [6]
TrdrdSc [1]
TrdrdSd [4]
TrdrdDd [4]
Tcke [1]
ProcODT [40 ohm]
Cmd2T [1T]
Gear Down Mode [Disabled]
Power Down Enable [Disabled]
RttNom [RZQ/7]
RttWr [RZQ/3]
RttPark [RZQ/1]
MemAddrCmdSetup [Auto]
MemCsOdtSetup [Auto]
MemCkeSetup [Auto]
MemCadBusClkDrvStren [30.0 Ohm]
MemCadBusAddrCmdDrvStren [20.0 Ohm]
MemCadBusCsOdtDrvStren [24.0 Ohm]
MemCadBusCkeDrvStren [24.0 Ohm]
 
New BIOS 5404

Changelog:
1. Update AGESA version to ComboV2PI 1.2.0.Ca

ROG CROSSHAIR VII HERO BIOS 5404
ROG CROSSHAIR VII HERO(WI-FI) BIOS 5404
Upgraded via Q-FLASH (button in the back of motherboard and bios on usb stick in special port), got stuck in Q-code 98. with previous BIOSes q-code 98 ("Console input device connect") is just before bios error message about no CPU fan connected shows up ( i have watercooled system). Flashed back 5302 the same exact way - all ok. it looks like i will have to skip this one.

I did try to unplug what i can, no change, but there are few inside USB connections that i was notbothered to check, so i just downgraded
 
Help here.

Today i notice my Qdisplay codes is working Weird:

Boots normally, shows codes, the last one is 0d, and then turns OFF. Nothing. NAda. Niente.

No codes, nothing.

The only strange thing i notice was the CPU on MAX speed, did go Power saving options and put that normal.
No errors, weird things or whatsoever. Entering Bios display normally code of bios and also boots normally.

AMD 2700@4150, 16G ram, W10 Enterprise LTSC, and 5700 AMD.

It plays games, even i only did try a minute. No memory errors or weird BS....

P.S. Yesterday i remove PC to the floor to remove air on the liquid from top radiator. All went normally and there arent any leakeds.
 
New BIOS 5502

Changelog:
1. Updated AGESA version to ComboV2PI 1.2.0.Cc.
2. Resolved CPU exception when adjusting items like ""When system is in sleep, hibernate, or soft off states"" in certain languages.
3. Fixed SMM Lock Bypass and Sinkhole security vulnerabilities.
 
  • Rep+
Reactions: Cncrcmoto
Flashed 5502 works ok so far.
Ditto here it's working like a champ for me too. Just upgraded to 5950x and 7900xtx. Also popped in a mm.2 drive as my primary.
 
New BIOS 5602:

1. Updated AGESA version to ComboV2 PI 1.2.0.E.
2. Implemented security updates.
 
New BIOS 5602:

1. Updated AGESA version to ComboV2 PI 1.2.0.E.
2. Implemented security updates.
same issue that i have since BIOS 5404 - Q-code 98 , this time i even see "Press DEL or F2 for BIOS" screen, but nothing happens, NUMLOCK on keyboard works, unplugged everything got Q-code d7
Back to BIOS 5303 - all smooth and fine.
 
Did you enable it in the BIOS? I just repurposed one of my old C7H motherboards to built a computer for my brother that is compliant with Window 11 24H2 mandatory TPM requirement. Was working and detected after we got done installing Win 11.
 
  • Rep+
Reactions: gupsterg
13,681 - 13,697 of 13,697 Posts