im on a asus crosshair with a fx8120 what all do i need to turn off in bios?
what are all the settings to turn off to overclock?
leo5111
1 - 9 of 9 Posts
Joined
·
548 Posts
ok i figured that out can someone help me set my ram speed? it this ram http://www.newegg.com/Product/Product.aspx?Item=N82E16820145345 i have to learn sometime i was allways running my ram on dividers to avoid learning to set it
![biggrin.gif]( "biggrin.gif")
Joined
·
2,023 Posts
hello,
set your ai tweeker to manual and set your ram speed and timing manually.
if you have updated your bios to the newest,check the advanced setting/ northbridge tab as i found my bios had ECC enabled for some reason.
i think thats all.
![wink.gif]( "wink.gif")
if your going to overclock it,then.....
you need to turn of cool and quite,c1e,c6 state,apm ,its everything on the advanced setting/cpu setting tab,you then should turn off your turbo core as its locked to set speeds and you cant overclock it and it throttles your cpu to 2800mhz.
if you want to use cool and quite,you will have to auto volt to get a reduced voltage.iam doing this myself,but i have set my cpu load line to ultra high as that give me the same voltage as the auto dose,in my case 1.34v @ 4ghz and 1.34v under full load.
set your ai tweeker to manual and set your ram speed and timing manually.
if you have updated your bios to the newest,check the advanced setting/ northbridge tab as i found my bios had ECC enabled for some reason.
i think thats all.
if your going to overclock it,then.....
you need to turn of cool and quite,c1e,c6 state,apm ,its everything on the advanced setting/cpu setting tab,you then should turn off your turbo core as its locked to set speeds and you cant overclock it and it throttles your cpu to 2800mhz.
if you want to use cool and quite,you will have to auto volt to get a reduced voltage.iam doing this myself,but i have set my cpu load line to ultra high as that give me the same voltage as the auto dose,in my case 1.34v @ 4ghz and 1.34v under full load.
Joined
·
2,023 Posts
np,
dram timing controls,its in the ai tweeker.3 at the top of the list are 9 and the 24 is the fourth.check your ram packet as there should also be a 5th number(33?)thats dram row cycle time, and a 1t or 2t setting, thats right at the bottom.
dram timing controls,its in the ai tweeker.3 at the top of the list are 9 and the 24 is the fourth.check your ram packet as there should also be a 5th number(33?)thats dram row cycle time, and a 1t or 2t setting, thats right at the bottom.
Joined
·
2,023 Posts
one more thing,are you using a stock cooler?
beware as temperatures are huge with the 8120 at running prime style stabilty tests.
beware as temperatures are huge with the 8120 at running prime style stabilty tests.
Joined
·
548 Posts
Quote:
![wink.gif]( "wink.gif")
im on a cooler master v8 its not the best out there but is ALOT better then the stock oneOriginally Posted by MrPerforations
one more thing,are you using a stock cooler?
beware as temperatures are huge with the 8120 at running prime style stabilty tests.
1 - 9 of 9 Posts
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
