I was playing around with processor settings in windows trying to get the new rig to scale better but I just went a little overboard and made a couple changes I should have been more careful of, and it got stuck in a boot loop. Fixed now with a second SSD and fresh W10 install.Sorry to hear about the crash -- was it hardware failure, or corruption?
It's heavily memory bound. Try running it with 500 less on the memory. That will give you an idea of what you're losing to cards that can do more than +1500.View attachment 2581609![]()
I scored 10 723 in Speed Way
AMD Ryzen 7 5800X, NVIDIA GeForce RTX 4090 x 1, 32768 MB, 64-bit Windows 10}www.3dmark.com
Small improvement vs my past score, but damn, can't get more than thiswondering if the 5800X is actually a bottleneck here lol (and now I can't seem to be able to do +1160Mhz on VRAM again, so even sadder moment)
It seems that getting 10920+ or more gets you in the top 100.
Yep, colder days lately. It is pretty VRAM intensive, tried with +600Mhz and it was like 3% slower (10400~), though at this point, having so many crashes, the VRAM may have suffered degradation or similar lolIt's heavily memory bound. Try running it with 500 less on the memory. That will give you an idea of what you're losing to cards that can do more than +1500.
Also, the mem doesn't like to be cool/cold, so if you have reduced temps and lost mem stability, that is the issue. I actually slightly beat my chiller run at ambient the other day because of that.
Seems like your processor is throttling just a bit, I mean I doubt it's losing more than a couple points from those dips, but still, it's something to look into....View attachment 2581609![]()
I scored 10 723 in Speed Way
AMD Ryzen 7 5800X, NVIDIA GeForce RTX 4090 x 1, 32768 MB, 64-bit Windows 10}www.3dmark.com
Small improvement vs my past score, but damn, can't get more than thiswondering if the 5800X is actually a bottleneck here lol (and now I can't seem to be able to do +1160Mhz on VRAM again, so even sadder moment)
It seems that getting 10920+ or more gets you in the top 100.
Now that you mention it, you're right; here is another run (did 10700) and it happens the sameSeems like your processor is throttling just a bit, I mean I doubt it's losing more than a couple points from those dips, but still, it's something to look into....
View attachment 2581613
Yea so +1600 would put you around 11000 if it continues to scale (which it seems to).Yep, colder days lately. It is pretty VRAM intensive, tried with +600Mhz and it was like 3% slower (10400~), though at this point, having so many crashes, the VRAM may have suffered degradation or similar lol
Pretty nice score there, are you using clean 522.25 drivers?
It will take something like opening the window on a cold day and praying for a breeze in at just the right moment -- I'm at the point of blood from a rock with the hardware. Moving core and memory clocks higher is having little (if any) effect.@stahlhart
good run. you only need 8 more points to move above @cssorkinman, pretty sure you can make that happen!
View attachment 2581634
I had the same issue with vram. Bios flash to asus oc strix seemed to help. Basically I would get a black screen at launch. 0 artifacts.View attachment 2581609![]()
I scored 10 723 in Speed Way
AMD Ryzen 7 5800X, NVIDIA GeForce RTX 4090 x 1, 32768 MB, 64-bit Windows 10}www.3dmark.com
Small improvement vs my past score, but damn, can't get more than thiswondering if the 5800X is actually a bottleneck here lol (and now I can't seem to be able to do +1160Mhz on VRAM again, so even sadder moment)
It seems that getting 10920+ or more gets you in the top 100.
I tried some others VBIOS but no luck sadly, my VRAM is inestable at +1100-+1175 (depending of temps), +1200 is crash 100%; probably gonna try some other VBIOS later, but not so much hope. Kinda sad NGL with this TUF, after the 3080 TUF which was actually really amazing, I could do +1600 on the VRAM and no issues.I had the same issue with vram. Bios flash to asus oc strix seemed to help. Basically I would get a black screen at launch. 0 artifacts.
Also I do think cpu speed matters a little. My run was at 6ghz.
I did the inspector tweaks and some os tweaks, performance regressed for me lol...