[born2killU]

Ok Guys you saw that cheap cardboard thingy I made Here. Now im gonna try make a professional looking one

Heres my plan (Ill try sketch it out later)

Ok About the size of an average phase change unit, about 7" High

6 120mm fan holes (3 on each side)

Body made out of clear black acrylic and the bottom 1.5" made out of Crystal clear acrylic (this will be the res)

Pump situated near the back pumping into the radiator which will go into the blocks then into the res)

I will be using a D5 pump and my BIP360 like in the waterbox I already made

SO, Do you think its possible ?? Will I need metal retention brackets to keep it from breaking ?

 

[prosser13]

Sounds pretty simple apart from the custom res bit

 

[born2killU]

im not to worried about the res but my main concern is if the 1/4" Acrylic will be able to support the weight of my PC

 

[CyberDruid]

Quote:

Originally Posted by born2killU Ok Guys you saw that cheap cardboard thingy I made Here. Now im gonna try make a professional looking one Heres my plan (Ill try sketch it out later) Ok About the size of an average phase change unit, about 7" High 6 120mm fan holes (3 on each side) Body made out of clear black acrylic and the bottom 1.5" made out of Crystal clear acrylic (this will be the res) Pump situated near the back pumping into the radiator which will go into the blocks then into the res) I will be using a D5 pump and my BIP360 like in the waterbox I already made SO, Do you think its possible ?? Will I need metal retention brackets to keep it from breaking ?

If you get nice edges on the acrylic and use the proper solvent it will be plenty strong.

 

[born2killU]

im thinking about having somebody make this for me as I have no equipment or tools.. or the most important think, EXPERIENCE (actually common sense is the most important but I have some of that in a jar on my desk)

Anyone know anyone who might be able to do it ? *nudges druid*

 

[born2killU]

Very Basic Sketch

 

[d3daiM]

bump..

I wish I worked with acrylic a little more.

Get druid and syrillian to help you out.

 

[MADMAX22]

if you use the right glue stuff the joints will be as strong as the regular plaxy, 1/4" should be plenty strong enought o handle a comp on top of it

 

[CyberDruid]

Yeah man I would be glad to make it for you--you are pretty close too. Shipping won't be too turrible. I need exact dimensions. And next time try using your hands instead of your toes when sketching the unit (lol)

 

[born2killU]

There are some more dimentions

and im sorry if god only blessed me with feet

not everyone can have hands you know

 

[NOS---]

Someone made a rad box outa MDF on here.

Gimmie a sec.

 

[born2killU]

Bumpity Bump Bump

 

[pjlietz]

Quote:

Originally Posted by NOS--- Someone made a rad box outa MDF on here. Gimmie a sec.

You may be thinking of the Throne for my Armor, work log is in my sig, though it's missing some of the pic's.

Here's the link to the second phase of the throne, I did finish the work, but never did the work log

Now it all sit's empty in the corner, lol.
http://www.overclock.net/case-mod-wo...-part-2-a.html