More like auto IF:1:1 for ddr5
There's no 1:1:1 like Zen3

 

Glad at least two of those are non-RGB.

 

Hynix M-Die should be good enough if we run it at 6000MHz. Cant wait to get overclocking.

 

Looking forward to seeing ddr overclocking on zen 4. I wonder how much different it is from intel?

 

My m-die is ready

Some more pictures can be found here:

I'm just waiting for some heatpads so i can install the bitspower heatsinks on my newly arrived a-die

Looking forward to test what works best on a 7950x, and if u can run all sticks at the same time..

 

Hynix M-Die should be good enough if we run it at 6000MHz. Cant wait to get overclocking.

A-die might get better timings though.

 

A-die might get better timings though.

Possible but we dont know.

 

It's good to see 4xdimm works with 6000Mts for Hardware Unboxed. Not a catastrophe with running such compared to the official support numbers.

 

A-die might get better timings though.

thus far, my M-die runs much tighter timings and will run 1T, where my a-die runs higher clocks at lower voltage, but will not run 1T.

M-die would run 7000C30 1T at 1.55v, a-die 7000C32 2T @ 1.4v and 7800C34 2T at 1.48v; at least on Alder lake.

 

My m-die is ready
View attachment 2573345

Some more pictures can be found here:

I'm just waiting for some heatpads so i can install the bitspower heatsinks on my newly arrived a-die
View attachment 2573346
Looking forward to test what works best on a 7950x, and if u can run all sticks at the same time..

There should be 0 issues doing up to 6400 with 4-DIMMs on the Asus 4-DIMM daisy chain. It's just much harder to stabilize. I think AMD IMCs might fair better compared to the ADL IMC. No evidence to substantiate this, but I just have a feeling.

 

I got G.skill 6400C32, what die is that?

 

I got G.skill 6400C32, what die is that?

M

 

There should be 0 issues doing up to 6400 with 4-DIMMs on the Asus 4-DIMM daisy chain. It's just much harder to stabilize. I think AMD IMCs might fair better compared to the ADL IMC. No evidence to substantiate this, but I just have a feeling.

I couldn't get two DIMMs to 6400 stable on my Z690 ACE - using nice Dominators and a 12700K.

I'll bet that AMD has significantly better tuning, and that the motherboard manufacturers have learned a thing or two from producing boards for Alder Lake.

[which is why I'm here, to see how y'all do!]

 

Oh that channel is fresh
Let me get this up (repost) for everybody

BMEBD = M-Die
BAGBD = A-Die

Good Luck on SP rating, everyone 🙏🎇

 

I couldn't get two DIMMs to 6400 stable on my Z690 ACE - using nice Dominators and a 12700K.

I'll bet that AMD has significantly better tuning, and that the motherboard manufacturers have learned a thing or two from producing boards for Alder Lake.

[which is why I'm here, to see how y'all do!]

I really don't know what was up with MSI's bogus 6666+ claims, but you could definitely do 6600 on the Strix Z690-F and Hero reliably. You could also do 6400 across 4-DIMMs with enough effort, but certainly 6200 across 4. If you had a 2022 Asus 4-DIMM'er you could probably do 6400 easy, but no one tested it I don't think.

 

anyone know what this kit uses for IC's? F5-6000J3636F16GX2-TZ5N

 

anyone know what this kit uses for IC's? F5-6000J3636F16GX2-TZ5N

Should be Samsung. Broad stroke but I genuinely don't think EXPO kits have anything special about them.

 

well they are about 100$ cheaper than the 6400 tridentz kit 32 39 39

 

Do you know of any kits that have hynix M or A die? (i think those are going to be the best for low latency)