because your RAM isn't B-Die but you're using the calculator for B-Die.

 

Wait what, it clearly says Samsung B-die here :O

 

Googling "F4-3200C16D-16GVKB" says Hynix M-Die, but if Thaiphoon says B-Die then it's B-Die.

But 3200 16-18-18-18 are terrible XMP timings for B-Die, 3200/14 and 3600/15 or 16 are the bins you usually see. with most B-Die tRCD/tRP are usually 1:1 with tCL too.

go for less aggressive timings, might just be a lower bin.

 

Should I just try following this instead? (I didn't export my Thaiphoon burner file)
Sorry as I've told you, I'm new to this overclocking lol. I watched hardware unboxed, followed him but it gives me memory overclocking failure

 

*UPDATE* I have manage to set these timings and voltage but idk what to do next.
https://imgur.com/MaIIDUY
https://imgur.com/8aRfp4z

 

When Dram Calc. doesnt work for you do it manually yourself

Try something simple first like 3200mhz 16-16-16-16 tras 34 trc 52 and trfc 448 or 466
Start with 1.38V Dram and set SoC 1.1V

If that still doesnt work try same with Gear Down Mode enabled.

Also, go here for discussions:
https://www.overclock.net/forum/13-...dram-calculator-ryzena-1-7-3-overclocking-dram-am4-membench-0-8-dram-bench.html

 

Yeah, DRAM calc said 14 but I adjusted it to 15.
I'm very new to overclocking so I don't know what to do next. Last time I did what set the timings ALLTOGETHER and i didn't know you have to do it proportionally.

Try this https://www.overclock.net/forum/180...et/forum/18051-memory/1743986-vengeance-lpx-overclock-settings-trash-b-die.html

Maybe it's the same bdie, you could also go 3600 with similar timings

Alright I will try this, thanks!

 

Try this https://www.overclock.net/forum/180...et/forum/18051-memory/1743986-vengeance-lpx-overclock-settings-trash-b-die.html

Maybe it's the same bdie, you could also go 3600 with similar timings