Can someone please help me with tightening my timings further for 6000Mhz CL28? In the left are the EXPO defaults, I watched some Bz videos for 9800x3d and copied most of his timings and left tCL tCRD tRP tRAS and tRC on AUTO managed by EXPO profile and lowered tRFC1 to 366 and raised FCLK to 2200Mhz, also since I watched his new take on tRAS I set it to 126 and tRC to 66
Lowered voltages from EXPO to 1.05v Vsoc (default EXPO was 1.2v), MEM VDD to 1.3v (default EXPO 1.4v), VDDQ to 1.3 and CPU VDDIO to 1.05v (default EXPO 1.4v both) and MEM VPP to 1.8v (default EXPO 1.85v)
![Image]()
(Left photo is EXPO default timings, right my manual ones over expo)
Any insight would be highly appreciated! I tried with 6400Mhz and I can boot with 1.2Vsoc and its very unstable
I suck at getting the right timings for it and even less the right voltages since I'm really new and this is my first ever PC so I'm more than glad to just tighten the base EXPO profile of my kit and call it a day if someone can help me to do so
This is my RAM Kit if it helps with something CORSAIR Vengeance DDR5 RAM 32GB (2x16GB) 6000MHz CL28 AMD Expo (CMK32GX5M2B6000Z28)
Lowered voltages from EXPO to 1.05v Vsoc (default EXPO was 1.2v), MEM VDD to 1.3v (default EXPO 1.4v), VDDQ to 1.3 and CPU VDDIO to 1.05v (default EXPO 1.4v both) and MEM VPP to 1.8v (default EXPO 1.85v)
(Left photo is EXPO default timings, right my manual ones over expo)
Any insight would be highly appreciated! I tried with 6400Mhz and I can boot with 1.2Vsoc and its very unstable
I suck at getting the right timings for it and even less the right voltages since I'm really new and this is my first ever PC so I'm more than glad to just tighten the base EXPO profile of my kit and call it a day if someone can help me to do soThis is my RAM Kit if it helps with something CORSAIR Vengeance DDR5 RAM 32GB (2x16GB) 6000MHz CL28 AMD Expo (CMK32GX5M2B6000Z28)
