i'm currently in the process of switching cases to have all my watercooling gear in and ive been careful not to hit anything like "clear CMOS" button or anything like that so my OC settings will not be effected, but my big ass hands hit the "Mem OK" button on the motherboard... are my OC settings for cpu gonna be all jacked up now or just memory settings? Im not gonna have time for about another week to finish this install all up so im asking this question here. I havent saved my OC settings in bios yet and am gonna be pissed if there all jacked up. thanks
newls1
Memory issues can be difficult to diagnose and even more difficult to fix or work around. If memory problems are preventing your system from booting, MemOK! can help by automatically loading failsafe settings to enable basic functionality with the simple push of a button on the motherboard.
Source
Jacked! But, how jacked? Depends on what the button actually did.
Source
Jacked! But, how jacked? Depends on what the button actually did.
MemOK just defaults the RAM speeds the next boot, it doesn't remove your changes to the BIOS. It is there so that if you're overclocking memory and it won't POST, you hit it to get default speeds and back into the BIOS for more changes. Once you go back in just hit save&exit and you should be right back where you were.
Quote:
WINNING! thank youOriginally Posted by Scorpion49
MemOK just defaults the RAM speeds the next boot, it doesn't remove your changes to the BIOS. It is there so that if you're overclocking memory and it won't POST, you hit it to get default speeds and back into the BIOS for more changes. Once you go back in just hit save&exit and you should be right back where you were.
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
