Accelero Twin Turbo II here on my GTX 680:

 

Quote:

Originally Posted by Anth0789

Accelero Twin Turbo II here on my GTX 680:

Spoiler: Warning: Spoiler!

added

 

does anyone else have the 7970 edition and realize how poorly placed the main block is? the cooler is the exact same size of the pcb, but is offset an inch from the mobo and 2 inches from the faceplate.

 

here are some pictures of mine!

 

Nice, I didn't even know that theres owner's club of AC coolers

Im going to join when I seat my new Accelero Xtreme PLUS II when I get it from post office! Or try to seat this Accelero Xtreme 7970 to my 4850

Any tips, how to use that G1 thermal glue? I've read that someone had drying problems when waited over 5hours, even over night. Somebody also said it needs heat, is that true?

 

Hah, I actually got that Accelero 7970 mounted to my ATI 4850!!

Now starts the overclocking, max temp have been 46 from memory now, others were somewhere 40-38, pretty impressive so far.

 

Add me in, I have Accelero 7970 mounted to my ATI 4850

I overclocked my card to core/memory 765/1175MHz from default 625/1005MHz.

Max temps with overvoltage 1.158V:
DispIO: 42
MemIO: 62
Shader: 46

My old temps were with normal voltage 1.084V:
DispIO: 78
MemIO: 83
Shader: 78

Pretty impressive for me

 

Quote:

Originally Posted by MooMoo

Any tips, how to use that G1 thermal glue? I've read that someone had drying problems when waited over 5hours, even over night. Somebody also said it needs heat, is that true?

Note sure about the heat, but I found that the glue did not bond all that well after 5 hours, but it was fine another 5 or 6 hours after that. If I was installing the cooler again, I would probably wait 24 hours.

Edit - I see you have already installed the cooler. Did you have any problems with the glue?

 

Quote:

Originally Posted by rossb

Note sure about the heat, but I found that the glue did not bond all that well after 5 hours, but it was fine another 5 or 6 hours after that. If I was installing the cooler again, I would probably wait 24 hours.
Edit - I see you have already installed the cooler. Did you have any problems with the glue?

Well, I just left it for over night and it was all fine

Only downside was that there was too much thermal glue for one apply and you can only apply it once, so there should be 2 mixing bags

 

I have a question, I love my accelero extreme plus 1, i used it on a gtx470, it was fantastic. Now i bought a gtx660 , this one: http://static.scan.co.uk/images/products/1922506-c.jpg
Since the accelero etreme plus 1 doesn"t fit i"d like to buy accelero extreme plus 2. Oficcialy only the extreme 3 fits a gtx660 but i don"t see a reason for plus 2 version not to fit the card. When i tried fitting plus 1 version the only thing blocking me was a litttle piece of heatpipe that is removed on a plus 2, and plus2 also has a compatibile backplate. So is accelero extreme plus2 compatibile with the gtx660?

 

I have one running on my MSI HD 6970 planning on getting a second for my other 6970 in the next day or two.



Single card temps are -

Idle: 31c

Load: 53c (While benchmarking Heaven 4.0)