Reserved

 

Reserved

 

Oh now that's sexy. Loving the little hard drive holders hidden away!

 

Is there a pedestal coming? Also will TX10's now have those 3x120 fan mounts between the motherboard chamber and the top/bottom heat chambers?

 

aw... you stole my idea of the 180mm fans (taking credit even if you were already planning it

)

 

Thanks

Yes, we'll have a pedestal available in a couple of weeks. I don't know if we'll have the 120mm fan holes on a TX10 or not. My assumption was that most TX10 buyers would have very specific requirements for where (and if) they would want fans and what type they would be, and would probably not want to have a big hole right where they wanted to put something else. The STH10 (like the other cases) is intended to be a little more turn-key for things like fan mounts (which btw, could be used to mount a 360).

 

Quote:

Originally Posted by Case Labs

We are proud to announce that the STH10 is officially released and available for preorders. Preorders will begin shipping January 23rd. Preorders will not be available on the website so please PM or email me at the address below for orders.
The STH10 is available "flat-packed" (unassembled) to save on shipping or fully assembled.
Both XL-ATX and HPTX form factors are available (exterior case dimensions are the same).
Features (standard equipment):

• All aluminum construction - .090" (2.3mm) chassis .063"(1.6mm) doors/covers
• Choice of ventilated or solid doors and covers (on a panel by panel basis)
• Slide out MB tray with Tech Station conversion kit
• Dedicated Mounts for 2 HDD's and 4 SSD's plus one 3.50" Bay
• Choice of hex mesh or 40mm fan holes on PCI back plate
• Quad PSU mounts (Support bracket available: MAC-123)
• Extensive room behind the MB tray for wire & tubing management.
• Two single bay filler plates and five triple bay cover plates
• Filler plates for top and bottom radiator openings, MB Chamber and 40mm fan openings on MB tray (if selected), PCI slots, and three PSU covers
• Four sets of mounting brackets for 5.25" devices (MAC-125)
• Lamptron anti-vandal style switches (power & reset) and wiring harnesses: blue ring for power and red dot for HDD activity. They are standard switches that can be easily swapped out for custom color combinations.
• Four rubber feet with screws (casters are available: MAC-107)
• Misc. hardware: Thumbscrews, MB standoffs, Tie-wraps, etc.
• Available in black matte or white gloss

Case Configuration Options:
ATX Layout: Standard (N/C), Reverse (N/C)
Form Factor: XL-ATX (N/C), HPTX (N/C)
MB Door: Ventilated (N/C), Solid (N/C), XL Window (20.00)
Top Cover: Ventilated (N/C), Solid (N/C), Ext. Ventilated 120mm (60.00)
PCI Back Plate: Fan Holes (N/C), Hex Mesh (N/C)
Packaging: Flat-Pack/Unassembled (N/C), Assembled (N/C)
Specifications:
Size: 32.25"H x 26.56"D x 11.25"W (819mm x 675mm x 286mm) *
PCI Slots: 10
Form Factor: XL-ATX (13.60" x 10.75") or HPTX (13.60" x 15.00" - 346mm x 381mm)
Max Radiator Size - Upper Chamber Side: 120.4 (Mounts not included)
Max Radiator Size - Upper Chamber Top: 140.4 or 180.3 (Mount not included)
Max Radiator Size - Upper Chamber Side: 140.4 (Mounts not Included)
Cooling Tower Clearance: 180mm
Flex-Bays (5.25" Bays): 17
HDD Capacity: 2 native (22 using Flex-Bays) plus 4 native SSD's
Weight: 32 lbs.
* Note: Sizes shown are for the case only. Rubber feet add .75" (19mm) to height, optional casters add 2.63" (67mm).
Price: $469.95
More information to come…

I'm a little bit confused, there is no mention of the Max Radiator Size for the bottom section only upper. Can you fit two 140.4 radiators in the bottom one on each side? My plan is to mount two 140.4 Hardware Labs 560 SR1 radiators in the bottom section while mounting the PSU in the top section, can this be done?

Could we also request the inner dimensions of both top and bottom sections?

 

Very nice case, would love one to replace my TJ07. Got everything I want in a case: 480 rad mounting, nice clean lines, and easy customisation. Too bad the shipping cost to Australia is horrendous. Having to pay for 2 cases and only getting one dampens my enthusiasm

 

Quote:

Originally Posted by Systemlord

I'm a little bit confused, there is no mention of the Max Radiator Size for the bottom section only upper. Can you fit two 140.4 radiators in the bottom one on each side? My plan is to mount two 140.4 Hardware Labs 560 SR1 radiators in the bottom section while mounting the PSU in the top section, can this be done?
Could we also request the inner dimensions of both top and bottom sections?

Fixed...

(Yes, you can put two 140.4's in the bottom). I'll get some dimensions tomorrow.

EDIT: Yes, two 560's on the bottom and PSU(s) on the top would work fine. You can easily mount another push/pull 480/540/560 on top with the extended cover)

 

Jesus. Only you guys could make an sr2 look small.... I will own 2 or 3 of these once I have some stability in my life. Do I get a bulk discount?

 

Quote:

Originally Posted by SmasherBasher

Jesus. Only you guys could make an sr2 look small.... I will own 2 or 3 of these once I have some stability in my life. Do I get a bulk discount?

lol... can i get one if i design an mITX LAN rig insert?

... and im gunna take a couple of pics of the STH10 with just an mITX mobo in it when i get it just for Ss&Gs

 

just saw this on FB. Congrats guys!!!

Now my m10 gonna look small

 

Lol mITX in this monster. Do want to see.

OT: The case is so sexy. >450 kinda kills it for me. Perhaps later this year after saving...

 

Quote:

Originally Posted by SmasherBasher

Jesus. Only you guys could make an sr2 look small.... I will own 2 or 3 of these once I have some stability in my life. Do I get a bulk discount?

Ha ha. I think this will do it for "Land of the Giants" for awhile...

Time to think small... er

 

Quote:

Originally Posted by RussianJ

Lol mITX in this monster. Do want to see.

OT: The case is so sexy. >450 kinda kills it for me. Perhaps later this year after saving...

lol... i had the same reaction when i first saw case prices like that, but i have long since come to terms with that is just what a good case costs, and the fact that you shouldn't put a couple grand of hardware in a bad case

... as for the mITX... i think it will go in there along with my 2011 build rather nicely as a server

 

Amazing work as always Jim

 

Quote:

Originally Posted by Case Labs

Fixed...

(Yes, you can put two 140.4's in the bottom). I'll get some dimensions tomorrow.
EDIT: Yes, two 560's on the bottom and PSU(s) on the top would work fine. You can easily mount another push/pull 480/540/560 on top with the extended cover)

Can we get a picture of the Extra Large Window for the MB side? I don't think there are that many case manufacturers that can claim to fit half of what the STH10 fits radiator wise, not many can hold the larger 140.4's! I originally planned on buying a Silverstone TJ11 ($599.99) that costs a lot more, but with the STH10 capabilities and endless options its easy to forget about the Silverstone TJ11!

I believe these modular cases are bound to become the norm, all of the options for the individual to customize their case to how they want it, with the Silverstone TJ11 what you see is what you get! I have a feeling these TJ11's are piling up in warehouses all over the country. Can you project availability come the first week of March?

I am sold

 

i want to make babys with it.

 

Do you guys have stats on how many HPTX cases Caselabs sells? I've also only seen one SR-2, and it didn't have a case around it. I want to meet a dude that rocks an SR-2 as his dedicated web-surfer...

 

•Choice of ventilated or solid doors and covers
does this cover the side top/bottom panels in the picture that is ventilated now so i could have the sides fully solid?
and i love the bigger extended tops, wanted the TH10 but now i don't know. quit making such good cases you keep making me want every one you put out, great work guys.

 

+

+

+

= STH10

Spoiler: Video related

 

Quote:

Originally Posted by Shawnb99

•Choice of ventilated or solid doors and covers
does this cover the side top/bottom panels in the picture that is ventilated now so i could have the sides fully solid?
and i love the bigger extended tops, wanted the TH10 but now i don't know. quit making such good cases you keep making me want every one you put out, great work guys.

Yes, solid side panels are available are available for the upper & lower chambers. Thanks

I've come to really like this case and will probably use it for my own SR3 build later this year.

 

would there be any chance of not getting the SSD cage behind the mobo, and just getting as many HDD cages as you can shove back there? i plan to use both the full upper and lower sections, and i dont want HDDs crowding my flex bays, buy the time in done ill probably have around 10HDDs and 2 SDDs

EDIT:

and are these 180mm fan holes? or 140/120?

 

Quote:

Originally Posted by eskamobob1

would there be any chance of not getting the SSD cage behind the mobo, and just getting as many HDD cages as you can shove back there? i plan to use both the full upper and lower sections, and i dont want HDDs crowding my flex bays, buy the time in done ill probably have around 10HDDs and 2 SDDs

EDIT:
and are these 180mm fan holes? or 140/120?

Since the 3.5" external bay can't be moved, there is really only room for the one drive cage (2 HDD's). I suppose with the XL-ATX version, we might be able to get a 2-3 more in, but I don't think you'll get 10 HDD's + 2 SSD's behind the MB. A TH10 is better suited to that kind of thing.

The holes are 120mm. We may offer other versions in the future (definitely solid ones for custom apps).