[LionAlonso]

I guess agesa 1.2.0.3 patch C is not coming soon, first because GB always take more time than other brands with new AGESA and second because they have been paralized with the ransomware.

 

[Dyngsur]

Changed my old 5900x that was not working properly, got a new one.
Damn, works very well
Did some testing, all programs running etc, so I am not looking for pure bench just some testing what my G-Skill 3600 can do and they went to 4000 without error with low volt etc!

This aint final results, just started to work with it

 

[Nekrogeddon]

Changed my old 5900x that was not working properly, got a new one.
Damn, works very well
Did some testing, all programs running etc, so I am not looking for pure bench just some testing what my G-Skill 3200 can do and they went to 4000 without error with low volt etc!

This aint final results, just started to work with it

View attachment 2521265

View attachment 2521264

Hello there. I am planning on getting a GSkill 4000Mhz ram kit. I saw that yours is 4000Mhz too, are yours overclocked or factory set. I just wanted to know if that frequency is "weird" for 5900x. Cheers

 

[Dyngsur]

Hello there. I am planning on getting a GSkill 4000Mhz ram kit. I saw that yours is 4000Mhz too, are yours overclocked or factory set. I just wanted to know if that frequency is "weird" for 5900x. Cheers

my kit is G-Skill Ripjaws I have oc'ed em to 4000 from 3600 original.
Yeah its weird 3800 didnt work but higher worked better for me!
I think you need to be lucky with the cpu to get it to work over 3800, but I dunno.

 

[OldBones]

Gigabyte X570S AORUS Master Motherboard Review

Gigabyte X570S AORUS Master Motherboard Review - Funky Kit

The Gigabyte X570S AORUS Master motherboards feature upgraded power solution, passive and silent thermal design, and PCIe 4.0 components.

www.funkykit.com

 

[Spectre73]

Gigabyte X570S AORUS Master Motherboard Review

Gigabyte X570S AORUS Master Motherboard Review - Funky Kit

The Gigabyte X570S AORUS Master motherboards feature upgraded power solution, passive and silent thermal design, and PCIe 4.0 components.

www.funkykit.com

That was no review at all, IMHO. You can safely read the last page only and even then, you do not get much information out of it. For the remaining pages, just go to the manual and the aorus webpage

 

[Yuke]

Is it save to assume that at this point the sound pop/crackle issue some are experiencing is a hardware problem of early (day1) Motherboards and that there is zero chance for a solution?

You cant belive how sick i am of this, lol

 

[Nekrogeddon]

Hello guys, I got 2 questions. First off my Master doesn't cut off the power on usb ports when the system turns off. I tried ErP enabled but nothing. I have an external audio device (Astro mixamp pro) hooked with a usb on pc and optical cable with the mobo's digital audio output. Well, it stays powered on every time. The other thing is that when I put my system to sleep mode, it is set to wake up by keyboard or mouse movement which I dislike. I just want to press the power button again and wake the system up. I couldn't find any related setting in the bios. Btw I'm on F34 but F33 was reacting the same way on both occasions

 

[danisflying]

Hey guys, is anyone able to give me an opinion on these settings I've dialed in for F34 on my Aorus master + 5900x? Still learning so I'm concerned I could be pushing some of the voltages too high (ram is bdie btw).

Thanks!

 

[755SFF]

2 questions

I have revision 1.0 and similar USB sleep issue as you, on F33/F34. My mouse and keyboard have LEDs so it is common after sleep that one or both is lit in a dark room, or both will sleep, or neither will sleep. I have higher success with Hibernate vs sleep but not 100% - the BIOS rolls a dice. (Or it could be the chipset drivers and/or Windows and not the BIOS but it is too complicated to troubleshoot so I have been waiting)

On the other thing, you need Device Manager, find your device then click Power Management tab, and uncheck "allow this device to wake the computer".

 

[DustyBob]

Check Page 837 Try it with efiflash /c

 

[jornmulder]

Yes that's a good idea. Temps should be fine even after the "mod". Infact i completely unplugged the fan but left the heatsink on. Tho i have a ton of airflow in my case. If you are using a custom loop then it's likely you don't have that much airflow over the chipset. My chipset temps never go above 45c. It was hotter before. On the Master it's a bit of a pain to unscrew the chipset heatsink as you first have to unscrew the backplate.

can i take off the fan, and then put a noctua 40mm fan on it ? will that work ? i was thinking about a Zalman Northbridge heatsink ZM-NBF47 passive thing, but then i was reading if i get a new videocard then it will hit it.. so looking for something that cools, but also will fit.. any recommondations ?? greets jørn from Holland x570 gigabyte Ultra, making a stupid high pitch noise, i have send it to the webshop back took some time and they say nothing wrong with it and then i got the same mobo back, so now i still hear the chipset fan noise. what can i do, i already have it on silent with interval 3. now it is 67celcius. and not spinning yet.. but then if it spins i hear it and get headage from it stupid high pitch. i got 1 fan in front and 1 in the back from be-quiet and the darkrock pro 4. Greets Jørn

 

[jornmulder]

I did the same on an Xtreme. Haven't seen the upper 40's since. Under heavy load, my front case fans blow over the chipset.

edit since it was specified: this is with the side panel on.

witch one passive cooler did you get to replace the pch fan? brand? and will it still fit with a big videocard in my atx case with x570 gigabyte ultra? ver. 1.0

 

[Diablo85]

witch one passive cooler did you get to replace the pch fan? brand? and will it still fit with a big videocard in my atx case with x570 gigabyte ultra? ver. 1.0

there is no pch fan on the Xtreme X570. passive heatsink is all built in to the design of the board, to the right of the top 2 PCIE slots. I replaced the paste with kryonaut and slapped it back together.

 

[jornmulder]

there is no pch fan on the Xtreme X570. passive heatsink is all built in to the design of the board, to the right of the top 2 PCIE slots. I replaced the paste with kryonaut and slapped it back together.

oh so youi only replaced the paste and put it back together, with spinning fan ?

i want to put a new fan on or only a passive cooler block. only don't know if it's gonna fit

can somebody help me ?

 

[jornmulder]

i want to put a new fan on or only a passive cooler block. only don't know if it's gonna fit

can somebody help me ?

yea i dont have the Xtreme X570 , i got the Ultra x570 with a stupid crazy high pitch noise.

if i get a bigger videocard, i don't know if passive block is gonna hit it

 

[ghiga_andrei]

The other thing is that when I put my system to sleep mode, it is set to wake up by keyboard or mouse movement which I dislike. I just want to press the power button again and wake the system up. I couldn't find any related setting in the bios.

Cannot help you with your first issue, but for this one with the computer waking up on mouse movement I have fixed for myself also. There is no BIOS option to disable this, it is in Windows.
Go to Device Manager, identify the Keyboard and Mouse devices, right-click, Properties and in the Power Management tab uncheck the Allow this device to wake up the computer box.
You have to do this for both mouse and keyboard.
If you plug them later in other USB ports, you will need to do this again as it is based per port, not only device.

Hope it helps.

 

[Dan Hot]

Still no 1203c from gigabyte :/

 

[des2k...]

Still no 1203c from gigabyte :/

what's special about this new agesa ?
F34 is working great for me with my 3900x

 

[des2k...]

Cannot help you with your first issue, but for this one with the computer waking up on mouse movement I have fixed for myself also. There is no BIOS option to disable this, it is in Windows.
Go to Device Manager, identify the Keyboard and Mouse devices, right-click, Properties and in the Power Management tab uncheck the Allow this device to wake up the computer box.
You have to do this for both mouse and keyboard.
If you plug them later in other USB ports, you will need to do this again as it is based per port, not only device.

Hope it helps.

I always wonder why USB has power when the system is off with x570 master

I don't use sleep, I still have power to my usb ssd,nvme,lan,etc. I had one or two shutdown where RGB,mouse,keyboard was on but those go off usually(maybe I was playing with my mem,cpu oc)

The network cards link light being up is the worst since I have wake on lan off(bios and driver).