Overclock.net banner
81 - 100 of 438 Posts
Put me in for Extreme, keeping a minimum temp of 20c is too annoying in the middle of winter.
The 1050 isn't going to put up much of a fight but I'll see what it does with chilled water and a vgpu mod.

Pifast - 12.20s

TS - 2205 @ 2067/1750 1.15V
http://www.3dmark.com/spy/9878264

FS - 8067 @ 2067/1750 1.15V
http://www.3dmark.com/fs/21347729

R20 - 4059 (676.5)
Added.

Quick test
We need a rig picture and valid Futuremark links (I see the scores were validated online in the screenshots, but we still need the link please). :)
 
Hi,
understand correct? LoD allowed in FS and TS

Thanks

Gesendet von meinem ELE-L29 mit Tapatalk
No. From the OP: "For clarification, the Futuremark links are needed for validation of the score and SystemInfo version. In addition, for Fire Strike tesselation and LOD tweaks are allowed, however for Time Spy NEITHER tesselation or LOD tweaks are allowed"
 
Here are some possible leads for the use of the Asus OC panel 2 hotwire function for the GTX 1060 Strix OC gaming 6GB.
I have done some extensive searching but there isn't much info to be found on the subject.
Apart from Shamino R4E guide. Which can be found here:

downloads.hwbot.org/downloads/PDF/R4E_shamino_guide.pdf

With this knowledge and looking at some other cards I "ASSUME" this would be the way to hook up the panel.
I am trying to get some of this info confirmed but not sure when that will be.

See the picture for info.

https://www.overclock.net/forum/attachment.php?attachmentid=314516&thumb=1

In order to overcome the power limit you could solder the shunt resistor.
Also this mod isn't tested yet. And I am not sure if it is needed or would give any benefit.

https://www.overclock.net/forum/attachment.php?attachmentid=314518&thumb=1

The voltage controller is the uP 9511p. In which case you would need the FB pin, which is number 31.
See attached picture. The datasheet is pretty easy to find if you search for uP 9511s.

https://www.overclock.net/forum/attachment.php?attachmentid=314522&thumb=1

The rambling Wig from the UK - AHOC, made a video about the controller.
There is always something to learn from it.


So this is what I was able to get up with. Use it in your advantage but not any garantee is giving that these mods actually work. I haven't done them myself yet as I am waiting for some conformation which could take a few weeks. But I wanted to share what I was able to find.
If you have any more questions just ask! I might be able to help out or not ;-)
Please, keep us informed if you find anything that works or some other things to modify the card.
It never hurts to help!

Now, have fun and go murder some cards!
 

Attachments

Sorry only FS lod and tes allowed, TS nothing!?

Gesendet von meinem ELE-L29 mit Tapatalk
Yes, this is consistent with both HWBot and Futuremark.

Only test card.

One question: Do we need to run all test or we can do only GT?

FS https://www.3dmark.com/3dm/42390319

Graphics Score 17747

TS https://www.3dmark.com/3dm/42390555

Graphics Score 5679
Added.

You need to run the entire bench, otherwise we cannot tell if default settings were used.

Hey dudes,

My first 2 results:

Pifast - 12.20s

Spi32m - 355.984s
Added.

Here are some possible leads for the use of the Asus OC panel 2 hotwire function for the GTX 1060 Strix OC gaming 6GB.
I have done some extensive searching but there isn't much info to be found on the subject.
Apart from Shamino R4E guide. Which can be found here:

downloads.hwbot.org/downloads/PDF/R4E_shamino_guide.pdf

With this knowledge and looking at some other cards I "ASSUME" this would be the way to hook up the panel.
I am trying to get some of this info confirmed but not sure when that will be.

See the picture for info.

In order to overcome the power limit you could solder the shunt resistor.
Also this mod isn't tested yet. And I am not sure if it is needed or would give any benefit.


The voltage controller is the uP 9511p. In which case you would need the FB pin, which is number 31.
See attached picture. The datasheet is pretty easy to find if you search for uP 9511s.

The rambling Wig from the UK - AHOC, made a video about the controller.
There is always something to learn from it.

https://www.youtube.com/watch?v=X3Y_zbJOb7E

So this is what I was able to get up with. Use it in your advantage but not any garantee is giving that these mods actually work. I haven't done them myself yet as I am waiting for some conformation which could take a few weeks. But I wanted to share what I was able to find.
If you have any more questions just ask! I might be able to help out or not ;-)
Please, keep us informed if you find anything that works or some other things to modify the card.
It never hurts to help!

Now, have fun and go murder some cards!
Thanks for sharing!
 
Discussion starter · #94 ·
Here are some possible leads for the use of the Asus OC panel 2 hotwire function for the GTX 1060 Strix OC gaming 6GB.
I have done some extensive searching but there isn't much info to be found on the subject.
Awesome work, thanks so much for sharing!:thumb:

Thanks for updating the scores Nox, OP Updated!
 
Discussion starter · #95 ·
my 580 is here, haven't tested to make sure it works yet but assuming it does do we really have to wait before you send all the 1st place prizes to me?

:laughings
 
I doubt anyone is going to buy a new GPU and if anyone is I doubt they're going for a 560, but if anyone is then there is a janky cheap (but apparently legitimate) RX 560 on Newegg for $95.

It's the 896 shader core version but it can successfully flash to a Sapphire Pulse RX 560 BIOS and it'll unlock the full 1024 shaders.

RX 560 4GB on Newegg (+5% off with promo code MKTZV8W)

the youtube video I stole the info from
 
my 580 is here, haven't tested to make sure it works yet but assuming it does do we really have to wait before you send all the 1st place prizes to me?

:laughings
What did you get?
 
81 - 100 of 438 Posts